How to paste bathroom tiles ? It seems that there seems to be only one way of sticking the tiles. This is not the case. In general, there are many methods for attaching bathroom tiles. By combining different methods and various methods, bathroom tiles become more fashionable. So how do bathroom tiles fit ? Let's take a look together.
How to paste bathroom tiles
How to paste bathroom tiles
1, to avoid the tile water absorption rate is too large
How to paste bathroom tiles
When buying tiles, it is important to check the water absorption of the tiles. Drop water droplets on the back of the tile to see how fast the water spreads after it has spread. In general, the slower the absorption, the greater the density of the tile.
2, avoid the tiles on the back of the line is too shallow
How to paste bathroom tiles
In order to fit the tile closely to the wall, the back is generally designed with lines. When the lines are relatively deep, it can be ensured that the tile and the cement mortar layer will not fall off when they are partially detached.
3, sand is best to choose sand
How to paste bathroom tiles
The thicker the sand, the higher the strength of the formulated cement mortar, but if the strength is too high, it will lead to some bad results, such as cracking on the leveling ground.
4, the base layer of paving tiles need to be handled well
How to paste bathroom tiles
To avoid emptying the tiles, first the tiled wall and floor base must be clean. Be sure to remove all types of dirt on the wall and wet the base with water one day in advance to keep the humidity at 30-70%.
5, cement mortar needs to be full and even
How to paste bathroom tiles
When the cement mortar scraper is deployed on the back of the tile, it must be noted that the cement mortar needs to be full and even, and it is not possible to cut corners.
6, reserve enough expansion joints
How to paste bathroom tiles
A 2-5mm expansion joint should be reserved when laying tiles. If there are not enough expansion joints, under the effect of thermal shock expansion or moisture expansion, stress may occur between adjacent tiles and squeeze, resulting in empty drum fall off.
Above about how to paste bathroom tiles on the simple introduction to here, I hope to help you. For more information, please visit this website. Stay tuned.
Bathroom tile tiles
1. Product introduction
Coal-based column desulfurization column Activated Carbon used high quality Anthracite as raw material. Adding a certain proportion of adhesive, auxiliary catalyst, by selection, proportioning, grinding, molding, drying, carbonization, activation and deep processing made.
2. Application
This product is mainly used in all kinds of gas, such as water gas, semi water gas, coke oven gas, natural gas, carbon dioxide gas, city gas, synthetic ammonia process gas, and exhaust gas in sulfur dioxide chemical raw materials and other containing mercury. It also used for adsorption of flue gas of power plant equipment, including the removal of sulfur dioxide and saltpeter, which replace the lime desulfurization process before. It also applies to other gas that contains mercury cannot get rid of the low concentration, which is equal to or below the national emission standard.
3.Transportation and Packing
Woven bag, lined with plastic film bags, each 25kg can also be packaged according to customer demand. The product should be placed in a cool and dry place during storage; When transportation, it prevents to mixed with hard materials, to prevent carbon particles broken that affecting the quality of packaging, to prevent breakage. To avoid leakage or mixed with debris; to avoid water, oil and fire.
Column Desulfurization Column Activated Carbon
Activated Carbon Filter Paper,Desulfurization Activated Carbon,Solvent Recovery Activated Carbon,Sewage Treatment Activated Carbon
Ningxia YiFeng RuiDa Activated Carbon Co.,LTD , https://www.nxyfrdhxt.com