As people attach more importance to home decoration, ceramic tiles are used in a large amount in home life. I believe everyone will not be unfamiliar with the construction of ceramic tile grout. Tiles US grout construction can be used for ceramic tile, mosaic, stone, glass, wood, aluminum-plastic plate and other material crevice decoration, while waterproof, impermeability, non-stick oil and many other advantages. So, what are the methods for the construction of ceramic tile grout? Tiles US grout construction expensive expensive? Let's take a look with Xiaobian.
Tile US grout construction introduction
I believe that everyone will not be unfamiliar with tile sealants, then what are the methods for the construction of ceramic tile grout? In the actual use process, tile US grouts are obviously more decorative and practical than colored grout. Tile grouts have smooth surfaces such as porcelain, high strength, wear resistance, self-cleaning, easy to clean during use. , not easy to filth, waterproof, anti-pollution, moisture, impermeability and many other advantages. In the construction of ceramic tile grouts, the first step is to do a reserved design for the depth of the tile joints, use gap fillers or white cement to fill the gaps, and then use the willow to make the bottom of the tile joints flat and press out the grooves at the same time to make the tiles deep It is best to stay between 0.5-1.5mm.
Tile beauty grout construction method
Due to the different styles, types, performances, brands, etc. of ceramic tile grouts on the market, the construction methods of tile grouts are different. First, tile grout is loaded into the glue gun and the material is evenly distributed into the tiles. In the seam, after a good fight, you can use a wooden wedge to block the nozzle first, then use a scraper or finger to level the nozzle, and the excess material on both sides of the tile seam can be wiped with a moist sponge. The sizing agent is wiped before it has solidified, and it is cleaned with water after wiping. If the width of the tile seam is more than 3mm, the filled tile is much more uniform, so you don't need to sew the USG to make it level.
Tiles US grout construction steps
What steps and methods are correct in the construction process of ceramic tile grout? Before the construction of the ceramic tile sizing agent, it is necessary to bring a finger cuff to avoid soiling the fingers. Then use a utility knife or a brush to clean the dirt in the cracks in the tile. Be careful to clean it up to avoid affecting the service life of the tile sizing agent. Secondly, apply textured paper on both sides of the gap in the tile. Note that the textured paper should be tightly closed to the gap for easy cleaning. Install the tile grout on the glue gun, hold the glue gun, and then use the tile grout. Note that the angle between the glue gun and the ground is preferably 45°. Finally, scrape the tile US grout evenly, and clean the excess tile US grout.
Tiles US grout construction prices
The price of the construction of the US trousers is affected by many factors, such as the size of the tiles, the width of the tile joints, and the quality of the tiles. The following is a brief explanation.
The width of the glazed tile joints is 1.5 mm, depending on the specifications of the tiles, the price ranges from 16 yuan/square to 306 yuan/square. Antique tile seam width is not 3mm, depending on the tile specifications, the price from 22 yuan / square to 360 yuan / square.
The tile specifications are 800*800, 600*600, 300*600, 300*450, 400*400, 300*300, 200*200, 180*180, 160*160, 150*150, 100*100, and mosaic.
Moreover, according to different types of construction, the price of construction of the US sizing agent will also be different. What are the types of sizing agent construction?
Filled with construction: The gap in the tile is empty, there is nothing in it, and it is filled directly with the US sizing agent; generally 2*3 times US sizing agent, or even more times; the cost is also doubled.
Semi-filled construction: tile gap fill, fill seaming agent; use clean tools to clear the edge of the tile (used for bonding US grout); depth of about 0.8mm; into a US grout.
Tile US grout construction precautions
Do not poke with a sharp object during the construction process of the ceramic tile grout. Do not mix with strong acid and alkali substances to destroy the grout. Do not use tile trowels where tiles are empty. Tiles US grout construction time is generally not only saves the trouble of moving furniture before entering the furniture, but also will not damage the US grout, tile gap in the construction of ceramic grout can not have water, dust, grease, etc. Impurities, ceramic tile grout need to be filled with joints at the end of the foundation, the more smooth the United States and the better the effect of the joint.
The above information about the construction method of tile grout and construction price of tile grout is briefly introduced here, and we hope to help you. For more information, please visit this website. Stay tuned.
Tiles US Grout Price Tiles US Grout Ranking Tiles Waterproof Sealant Tiles Cross Price Tiles Baseboard Price
As an alternative for the traditional wooden skin SIPs (structural insulated panels), CSIPs is more suitable for the area with high humidity and severe terminate problems. CSIPs act as the framing, sheathing, insulation at the same time, which greatly increase the construction speed, save the onsite labor cost and result in a more energy efficient and cost effective system.
Insulated Panels,Sip Building Panels,Fiber Cement Board Sips, different facing Sips, Fiber cement facing SIPs, Cement Board Sips
Dalian Quacent New Building Materials Co.,Ltd. , https://www.quacenthomes.com