Yuba Encyclopedia: Cleaning and Maintenance of Yuba
Although many families now install and use Yuba products in the bathroom, no one will normally perform regular maintenance on the Yuba. In fact, regular maintenance of Yuba is still necessary. The method of maintaining Yuba is actually very simple, and once every 30 days or so, you can ensure the safety and effectiveness of Yuba. So, how to maintain the Yuba? How to maintain Yuba?
In the first step, when the user uses the Yuba for a long time, the switch panel is stained. When clearing the stains, the power supply (neutral and phase lines) should be cut off first, and when it is confirmed that there is no electricity, we remove the bulbs one by one. Wipe with a rag with a small amount of neutral detergent. After the stain has been wiped off, wipe it with a clean dry cloth.
The second step, picking the pull spring, is to have four springs on the four corners of the box. We must take it off. And use a neutral disinfectant or cleaning agent to wipe the surface of the Yuba and the surface of the bulb, these are wiped, but also clean the inside of the chassis, although the chassis is fixed on the roof, but we in order to ensure that the bathroom heater The service life still needs to be thoroughly cleaned.
In the third step, when cleaning masks, warm lights or lights, after confirming that the power is turned off, remove the warm light, lights, and masks one by one. Wipe the wipes with a small amount of neutral detergent to wipe off the stains. Afterwards, wipe with a clean dry cloth, and after wiping clean the lamp body and the surface of the mask, do not expose to sunlight or baking, and then install it. This cleaning can not only prolong the life of the bathroom heater, but also is beneficial to health. Yuba top temperature Yuba top temperature is generally not high, which is almost the same room temperature. Because Yuba is heated by heating lamps, it converts light energy into heat energy. The light is downward and does not affect the top.
Cleaning steps:
1. Make sure that the Yuba is turned off and completely cooled;
2. Remove the bulb;
3, use warm water with a soft cloth to thoroughly clean the lamp;
4, if there is a stubborn stain on the lamp head, you can use a neutral detergent to clean;
5. Choose a stable ladder or chair;
6, standing on the chair to wipe the outside of the bathroom clean;
7. Use clean water to completely remove the cleaners attached to the bulb and body;
8, ensure that the bathroom heater has been clean, dry and reinstall the lamp in place;
9, open the bath to check whether the various functions can be normal operation;
10. Shut off the bathroom heater and ensure that the bathroom air is relatively dry and has a certain degree of fluidity.
Recommended reading:
Yuba Encyclopedia: What is Yuba?
Yuba Encyclopedia: Classification of Yuba
Yuba Encyclopedia: Buying skills of Yuba
Encyclopedic knowledge: What is an integrated ceiling?
Yuba Encyclopedia: Installation and Use of Yuba
Yuba integrated ceiling integrated ceiling electrical lighting switch bathroom toilet ceiling
Wires,Wireshark,Wireshark Tutorial,wireshark oui
Tomato Cage, Fence Posts Co., Ltd. , http://www.nbwiremesh.com