(1) Wash with warm water below 60 °C.
(2) Neutral detergent is applied during cleaning, and detergents which are erosive to sunlight boards are not allowed.
(3) It is required to gently scrub with a soft cloth or sponge 蘸 neutral solution. Disable other hard, sharp tools such as coarse cloth, brushes, mops, etc. for cleaning.
(4) When grease, dry paint, tape blotting, etc. appear on the surface, use a soft cloth to scrub.
(5) The dirt under cleaning must be thoroughly rinsed with clean water.
(6) Finally, wipe the surface of the board with a clean cloth, and there should be no obvious water marks.
pay attention:
Unsuitable cleaning agents are alkaline solutions which can attack the surface of the board. Esters, ketones, halogenated hydrocarbons and all substances which can dissolve or swell polycarbonate are prohibited.
Diamond Saw Blades,Diamond Cutting Saw Blade,Diamond Tile Saw Blades
Diamond Saw Blades Co., Ltd. , http://www.nssawblade.com