Since the soft film ceiling is different from the general industrial products, the function and form of the soft film ceiling are different depending on the actual needs of the designer and the user. Almost every project has its own unique form and structure, and different construction methods and structural organization requirements are required for production. Even if the same design and effect requirements are required, the construction method needs to be changed appropriately depending on the construction site, the underframe material and the wall. Therefore, the soft film ceiling construction is fixed at the construction site and must be installed during construction. Personnel and installation methods flow to the site in different areas. Even in the same project, the installer must flow in different time and space according to the requirements of the construction process. The fluidity of the construction brings some special requirements and problems to the organization and management of the construction.
The construction of soft film ceilings is a combination of multiple types of work. It is necessary to coordinate with the woodworking, painters, electricians, fire plumbers, air-conditioning workers, etc. at the construction site, which increases the difficulty of construction.
Buttweld pipe fittings comprises of long radius elbow, Concentric Reducer, eccentric reducers and Tees.They are an important part of industrial piping system to change direction, branch off or to mechanically join equipment to the system. Buttweld fittings are sold in nominal pipe sizes with specified pipe schedule. BW fitting`s dimensions and tolerances are defined as per ASME standard B16.9.
Butt Weld fittings are also called Welded Pipe fittings. These welded fittings in carbon steel and stainless steel offer many advantages compared to threaded and socketweld fittings. The later are only available up to 4-inch nominal size whereas butt weld fittings are available in sizes from ½" to 102".
Reducing Elbow: Fittings that change direction in a piping system are called elbows. The directional change is given in degree such as 45 or 90. Long radius 90 degree elbow has the center line of elbow at 1.5 x NPS from eblow end. And the elbow ends in two different outdiameters
Reducing Elbow
Reducing Elbow, Elbow In Different OD, Special Elbow, Elbow Reducing, Reduced Elbow, Elbow Reduced,90 Reducing Elbow
Shijiazhuang Bang dong Pipeline Technology Co,Ltd. , http://www.bd-pipefitting.com