Smart lock how to change the password? Smart lock password modification method introduction. In the smart lock, although the fingerprint is a common one, there are still many users who only choose the password smart lock. After many consumers purchase the password smart lock, the password set for the first time is forgotten, or the password is set too. Simple, or password leaks need to be modified. Here is how to change the password smart lock. The contents are as follows:
Step one: Press the power button at the bottom of the outer panel and press the '*' key three times. The buzzer makes a long sound;
Step 2: Enter the old password and press '#' to confirm. The buzzer emits a long sound and the LED light flashes.
Step 3: Enter 6 to 12 new passwords and press '#' to confirm. The buzzer sends a long sound;
Step 4: Enter the same new password again and press '#' to confirm.
During the setting process, if there is an error in the input, the system exits the setup program. If the input is correct, the buzzer sounds a long sound (or music sound) to indicate success, and the LED light goes out.
Smart Lock Password Settings Detailed Step DescriptionFirst, the administrator password settings (the first time after the factory set the password for the administrator password)
Operation steps: 1. Open the battery cover. 2. Press the setting button once to make a sound. 3. Press the start key (one digit behind the keypad number 3), enter the password (3-8 digits) and press the # key. 4. The sound of the drop sounds and the operation is successful.
Second, open the card, password, fingerprint lock, remote control settings (the total number is 70, can only be set when the administrator password, remote control is optional)
Operation steps: 1. Open the battery cover 2. Press the setting key once. 3. Press the start key, enter the password (3-8 digits) Press the # key 4. Press the start key, enter the number (00-99) Press the # key. 5. Press the start button, enter the door open (3-8 digits), press the # key to end, the password is set successfully; read your finger at the fingerprint window, and after the drop sound, press and hold the same finger to read the fingerprint again. Reading the same sound twice means that the fingerprint entry is successful; the card to be set is close to the sensing area and the proximity card is set; press any key on the remote control to set the remote controller.
Third, delete the opening card, password, fingerprint, remote control
1. Open the battery cover 2. Press the Setup key twice consecutively 3. Press the Start key, enter the administrator password, press the # key
4. Press Start, enter the fingerprint, password, remote control number, and # key to delete. For example, if you want to delete the fingerprint, align your finger at the fingerprint window to read the fingerprint, and the card to be deleted is near the sensing area, press any key on the remote control.
Fourth, delete all cards, fingerprints, remote control, password (the administrator password will also be deleted)
1. Open the battery cover 2. Press the Setup key three times in a row 3. Press the start key, enter the administrator password 4. Finally, press the # key.
Password unlock (with anti-leakage function, you can press any number to prevent password leakage before entering the correct password). Enter the set unlock password, press the # key, the lock issued by the door lock indicates successful unlocking.
Outdoor Card Tool,Survival Card Multi Tool,Survival Multifunction Tool,Compact Outdoor Survivor Tool
Easy-Go Outdoor Co.,Ltd. , https://www.yjeasy-go.com