How to maintain the lukas hydraulic rescue equipment in Germany?

I. Introduction to Lukas in Germany

Germany Lukas Hydraulic Equipment Co., Ltd. was established in 1945 and its hydraulic equipment is well-known throughout the world. Lukas products include two major categories: high-pressure cylinders, hand-pressure pumps and so on. High pressure cylinders are divided into two series, 500bar and 700bar . High pressure oil cylinders and hand pressure pumps are widely used in construction sites and repair sites in factories and workshops.

Production : LUKAS hydraulic equipment is produced using the latest technology and the factory is located in Erlangen ( relocated in 1990 ). High-performance CNC metal processing machines, rotating shelving systems, and computer-controlled logistics are the salient features of the German lukas production line.

Quality Assurance : LUKAS pays attention to product quality, and each hydraulic device must pass multiple quality tests. In strict accordance with international standards, Lukas products are manufactured and tested to provide customers with high-quality, high-performance products. The company's quality management system conforms to the ISO 9001 standard and the environmental management system complies with the ISO 14001 standard. These management systems provide a broad monitoring framework for the production process.

Second, Germany lukas (lukas) rescue equipment maintenance

1 , LUKAS rescue equipment requires a repair every 5 years, once every 10 years

Major repairs, minor repairs and major repairs were carried out according to the technical requirements of the German LUKAS company.

2 , hydraulic top recovery, righting equipment: hydraulic top equipment maintenance should pay attention to the various components

There are no obvious cracks, deformations, or oil leakage on the outer surface; there is no aging, cracking, or oil leaking (oil tubing has been used for 5 years). When using the oil tube guard, care should be taken to keep it clean; the hydraulic pump station should check “three oils”. : Hydraulic oil ( N46 low-temperature wear resistant hydraulic oil, life is generally 1 year), gasoline ( 93 unleaded gasoline), engine oil (ordinary four-stroke engine oil, often checked according to dipstick calibration, supplement), wire rope is not obvious Broken stocks.

3 , hydraulic vehicle equipment: daily maintenance of hydraulic vehicle equipment should pay attention to the outer surface of each component

No cracks, deformation and leakage; tubing of aging, cracking, leakage; no oil manual pump station, to check the adequacy of the hydraulic oil; rope no broken strands.

4 、 Hydraulic breakage device: The daily maintenance of hydraulic breakage device should pay attention to the outer surface of each component

No obvious cracks, deformations, oil leaks; no aging, cracking, leaking oil pipes; hydraulic pump station should check the "three oils" namely: hydraulic oil ( N46 low temperature wear resistant hydraulic oil, life is generally 1 year), gasoline ( No. 93 or above unleaded petrol), engine oil (ordinary four-stroke engine oil, always checked according to the dipstick scale, added).

We should pay attention to the following matters when cutting objects:

1. Operators must wear protective masks;

2. When cutting the object, keep the vertical position between the tool and the object as much as possible;

3. Cut the object as close as possible to the end of the blade. The tip of the blade is suitable for cutting iron-type objects (similar to the principle of scissors).

4. The blade must be cleaned after use. When the blade is closed, only two blades can be touched.

We should pay attention to the following matters when expanding objects:

1. Operators must wear protective masks;

2. When squeezing the object as close as possible to the end of the blade, the nipper tip is suitable for expanding the iron-type object;

3 , after use must be cleaned pliers tip, when the blade is closed only 2 pliers tip can be parallel.

When lifting objects, we should pay attention to the following matters:

1. Operators must wear protective masks;

2 , must clean the work head after use

Note: Our company (China Rescue Equipment Network) provides the latest products for lukas rescue equipment . Please refer to the lukas product manual for specific maintenance of all lukas products. This article is for reference only.