Preparation before operation 1. Preparation before operation
1. The operator must tie the clothes hem and the clothes corner.
Bundle the cuffs and keep the items in the pockets clear
Empty state. It is strictly forbidden to wear the hanging accessories to operate the machine;
2, the operator's mental state must be good, strictly prohibited in
Excessive fatigue, after drinking or due to illness
Go to work;
3. Clean up the debris around the paper cutter and place the material to be cut.
Put it in the right place and check if there are any tools left in the machine.
On the device;
4. After booting, first check if the switch is normal and reliable.
Is the knife sharp, try again three times, observe that there is
No return, if problems are found, they should be eliminated in time;
Check whether the joints of the paper cutter are loose or not.
Set
No failure, etc., to ensure that the machine is shipped in a zero fault state
Row.
Second, the safety precautions in operation
1. Before starting the machine, the operator must remind the companion or
His personnel pay attention to safety and confirm that there is no danger.
Bootable
2. Before starting the machine, you must pay attention to the surrounding environment.
Nobody is doing other work on the machine;
3. During the cutting process, the operator does not
Have to touch the switch so as not to cause the machine to malfunction;
4. When the machine is running, the thought must be concentrated and prohibited.
Do things that have nothing to do with your job, so as not to distract yourself. cut
The paper machine prohibits two people from operating at the same time;
5. The operator must check the paper cutter before cutting.
Normal or not, then try cutting a few knives to confirm the machine
Can continue to operate after normal operation;
6. The operator should be strict during the operation of the machine.
Monitor the status of the machine is normal, when there is a strange sound,
If there is no such phenomenon, you must stop the operation immediately and
Report the relevant personnel to find out the fault, after the troubleshooting
Can be restarted;
7. When the machine is running, it is strictly forbidden to reach into the machine.
In the event of a malfunction, it is strictly forbidden to grab the paper by hand.
Stop, when the paper cutter does not return to the position, it is strictly prohibited
Reach out to take paper to prevent injury or accident;
8. Operators are not allowed to be on the job, off duty, and handed over to them at will.
Used by others. If you need to leave the machine for any reason, it must
Must be turned off to cut off the power before leaving;
Guoli Machinery Co., Ltd.
phone
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Also known as salt-based dyes. A dye which produces a cationic dye can be dissociated in an aqueous solution, and is classified as a cationic dye. Due to the poor color fastness and color fastness of the dyes dyed with alkaline dyes, it is rarely used in the dyeing of fabrics, mainly for the stationery and paper coloring and the manufacture of lakes.
The Alkaline Dye
Jinan Huijinchuan Chemical Industry Co., Ltd. , https://www.hjcchemical.com