Huaquan General Factory is a professional manufacturer of water treatment materials, with complete testing and testing equipment. It has an annual output of 40,000 tons of polyaluminium chloride and 30,000 tons of various filter materials. It has been awarded the “Quality Trustworthy Unit†by Zhengzhou Municipal Technical Supervision Bureau. In recent years, polyaluminum chloride in water treatment chemicals has become an indispensable agent in the wastewater treatment process of various industries due to its wide application.
In order to achieve the best flocculation effect and economic benefit of polyaluminum chloride in the use of polyaluminium chloride, the optimal dosage is determined experimentally according to different raw water turbidity, different seasons and different pool shapes. How to make the polyaluminum chloride play to the fullest? Henan Huaquan explains the specific use method for you:
1. Dissolve and dissolve the solution of pac into 5~10% alumina content into water. The best pH for the addition is 6.0~8.5. Choosing the best pH to add can maximize the benefits of coagulation.
2. Generally, the turbid water is 0.5~2.0kg (5~20ppm) per 100 tons. When the turbidity of the raw water is high, the dosage is appropriately increased. When the turbidity is low, the dosage can be appropriately reduced. For rural use, the medicine can be put into the water tank, stirred evenly, and allowed to stand. The supernatant can be used, and about 1 gram of this medicine is added every 50 kg.
3. If pac is combined with the high-molecular flocculant produced by our company, the effect is better. Dosing plan 1: You can use our company HY-A or HYC-601 together with this product to dissolve into a composite flocculant. Dosing plan 2: Add this product to the treated water to form agglomerates (usually 30-60 seconds) ), after adding our company's anionic polyacrylamide adsorption bridge into a large floc.
4. The aqueous solution prepared each time should not be placed for too long, so as not to reduce the use effect. Solid products can still be used after damp. Water treatment agents from different manufacturers or different grades should not be mixed and should not be mixed with other chemicals. They should be waterproof and moisture proof.
When innovation and technology are combined, the power of polyaluminium chloride is endless. Use the right method, use the best method, and use the innovative method to make full use of the role of polyaluminum chloride!
Http://news.chinawj.com.cn Submission:
Hydroxypropyl Methylcellulose Methoxyl content: With the reduction of methoxyl content, gel point raise up, water solubility reduce, surface activity decrease.
hydroxypropyl methylcellulose Methoxyl is White or similar to white powder, odorless No heat, chemical inertness, and not participate in the metabolism of human body.
hydroxypropyl methylcellulose Methoxyl HPMC used in Construction:
- Used as the water retaining agent and retarder in mortar to make it has good pumpability.
- Used as adhesives in plaster, gypsum material, putty powder or other construction materials to improve its workability and extend the operation time.
- Used as paste enhancer of ceramic tile, marble and plastic decoration and reduce usage of cement.
- HPMC water retention property can prohibit too fast dry and cracking after the slurry spraying and enhanced strength after hardening.
The molecular formula of hydroxypropyl methylcellulose is shown below
100000 Viscosity Hydroxypropyl Methylcellulose
Hydroxypropyl Methylcellulose Hpmc,100000 Viscosity Hydroxypropyl Methylcellulose,100000 Viscosity Hydroxypropyl Methylcellulose Hpmc,High Viscosity Hydroxypropyl Methylcellulose
Hebei pancan trading co. LTD , http://www.hbpancanshangmao.com