After the basin is used for a period of time, dirt will be attached to the basin drainer, which will result in the underwater in the basin. This situation is actually that the basin drainer is not installed.
The installation of the basin can generally be installed using the water supply kit. This kind of water supply package will be available in general hardware stores. Let us understand the steps of installing the basin under the water and installing the basin.
First, the basin installation steps
1. Prepare for work. Disassemble the body lock nut in the package and wipe the drain around the basin drain.
2, plug the main body. Apply a ring of waterproof glass glue to the bottom of the water removal body and insert the body into the drain hole of the basin.
3. Lock the water body. Place the basin on the table, install the lock nut from below, and lock the lower body onto the basin.
4. Choose the height. Lift the lifting rod and lock the lock to the bottom of the lifting rod to select the appropriate lifting height.
Second, the basin installation method
After understanding the basic steps of basin installation, Xiaobian will explain in detail the installation method of the basin below. Because the water installation installed in the basin is full of bouncing water with overflow holes, the installation steps of other water purifiers are basically similar.
1. Take out the basin drainer and remove the fixings and flanges under the water purifier.
2. When installing the basin, pay attention to pick up the basin top, take out the flange of the water purifier, and fasten the flange of the water purifier to the basin.
3. After tightening the flange, place the basin on the table and align the drain to the exit of the table. This step is the key to the installation of the basin.
4. Wrap the raw material belt at the appropriate position of the water purifier to prevent water leakage. It should be noted that when installing the water in the basin, be sure to point the water purifier to the drain of the basin.
5. Align the water purifier with the water outlet and put it flat. Note that the installation of the water in the basin must be taken out of the fixture of the water purifier and screwed onto the water purifier. Remember to tighten the water retainer with a wrench.
6. After the basin is installed, it must be tested. Fill the basin with water and see if there is any dripping or water leakage.
DTMADE has been committed to manufacturing cost-effective products for many years. The product line covers four major product series, Snow Blower, Lawn Mower, Leaf Blower, garden tools.
DTMADE product is designed to keep up with the derivation of the market, innovation and quality stablization always become the first goal we pursue.
DTMADE provides excellent service to each OEM customer, and every project is assigned to a dedicated project manager. It takes only 6-12 months from project inception to production launch.
Cooperating with us shift your business!
heavy duty snow blower,snow blower machine,electric snow blower,hot air snow blower
Dtmade Manufacturing Co., LTD , https://www.dtmade.com