The biggest advantage of the solid wood chair lies in the natural wood grain and the changing natural colors. Because solid wood is an organism that continuously breathes, it is recommended to place it in a suitable temperature and humidity environment. At the same time, it is necessary to avoid placing beverages, chemicals or overheated objects on the surface, so as not to damage the natural color of the wooden surface. If it is made of Mica board, when there is a lot of dirt, it is recommended to use diluted neutral detergent with warm water to wipe it once, and then wipe it with clean water. Remember to wipe off the remaining water stains with a soft dry cloth and wait for it to be completely wiped off. Afterwards, use the maintenance wax to polish, even if you are done, only by paying attention to daily cleaning and maintenance can you make the wooden furniture last for a long time.
Maintenance and maintenance of solid wood dining chairs
1: Pay attention to the cleaning and maintenance of the surface of the dining chair . Regularly gently wipe off the floating dust on the surface with a soft dry cotton cloth. Every once in a while, wipe the dust off the corner of the dining chair with wet cotton thread wringed out moisture, and then wipe it with a clean dry soft cotton cloth . Avoid using alcohol, gasoline or other chemical solvents to remove stains.
2: If there are stains on the surface of the dining chair , don't wipe it hard. You can gently remove the stains with warm tea water. After the water evaporates, apply a little light wax to the original part, and then gently rub it several times to form a protective film.
3: Avoid scratching hard objects. When cleaning, do not let the cleaning tools touch the dining table and chairs. Always pay attention. Do not let hard metal products or other sharp objects hit the dining chair to protect its surface from scratches.
4: Avoid humid environment. In summer, if the room is flooded, it is better to use thin rubber pads to separate the parts of the dining chair from contact with the ground, and at the same time to maintain a 0.5-1 cm distance between the wall of the dining chair and the wall.
5: Keep away from heat. In winter, it is best to place the dining chair at a distance of about 1 meter from the heating stream to avoid long-term baking, causing local dry cracking, warpage and local deterioration of the paint film.
6: Avoid direct sunlight. You should try to avoid long-term exposure to the whole or part of the dining table and chairs by outdoor sunlight, so it is best to place it in a place where you can avoid the sunlight. In this way, it does not affect the indoor lighting, but also protects the indoor dining chair.
(Source: Baidu Encyclopedia Editor: Peter)
Fluorescent Brightener BBU
blue light. And water softening with arbitrary proportion miscibility, the acid-base stability. Used in paper, can be used as adhesive coating components, colored coating components or join in pulp beater. Can be used for cellulose fiber whitening.
Optical Brightener BBU
C. I. 220 CAS 16470-24-9
FORMULA: C40H40N12O16S4Na4
MOLECULAR WEIGHT: 1165.12 (As international relative Atom Mass 1997)
EXCUTIVE STANDARD: HG/T3727-2003
Optical Brightener BBU,Liquid Blancophor BBU,Liquid Blancophor Bayer,Fluorescent Brightener Agent BBU
FORING IMPORT & EXPORT CO.,LTD , https://www.foringfor.cn