Tiles are one of the home decoration materials we are most familiar with. They are plastered on walls and floors, beautiful and generous, and also protect our home space. The paving of tiles is a door technology. We don't usually have too much contact with it. What do you need to pay attention to when tiling ? Today, we will introduce the following related content, and let's take a look at how the tiles are laid!
Tiling preparations
1. If your home is a concrete floor, you should level and cut the hair before laying the tiles. The thickness should be about 5-10mm and the spacing should be 30mm. After finishing, clean the floor's floating ash, if there is mortar. Or oily, need to be eradicated and washed with a small amount of water.
2, before paving, need to use ink elastic line, the door entrance and the ground bomb into a 90 ° baseline, need to start from the entrance door line, to protect the paving began as a whole block of tiles, home Yin corner The floor of the furniture, you can choose not to block the entire tile, but you need to play the approximate position.
Ground tiling how to build
Step 1. Lay a tile. If it is an earthenware tile, you need to soak the tile first. For about 20 minutes, you need to dry the tile in the shade.
Step 2. When tiling, apply the yellow cement mortar to the back of the tiles to ensure that each tile is evenly applied. Paste in order, from the outside to the inside, lay it well, and tap it with a rubber mallet. Use a horizontal ruler to see if the tile is flat and use a rag to wipe off the excess mortar on the porcelain surface.
Step 3: After the tiles are laid, wait 2-3 hours and use a white cement or US grout to perform the jointing. The gaps need to be filled tightly and full, with a smooth surface. Use cotton to wipe off excess paint.
How to Construct Wall Tiles
Step 1, need to clean up the grassroots level first, remove all kinds of stains on the wall surface, and moisten the wall with water the day before the tiling. If it is a new rough house, watering only needs 70% wet, you can arrange the tiles, ink lines, paving the wall.
Step 2. Before paving, you also need to mark the tiling paving points to see if the tiles are flat and skewed. , You can use the level ruler to check whether the wall tile paving is smooth. If it is not flat, you need to remove it and reapply it.
Step 3: In the early stage of paving, the wall tiles need to be placed in clean water for at least two hours. Tiles do not bubble in the water, you can remove it, set aside to dry.
Step 4: The wall tile is paved with a bottom-up paving. The bathroom tiles are tiled and need to be waterproof. The cement mortar needs to be evenly coated on the back of the tile. If it is gray, it needs to be re-paved.
Step 5: Some water circuits leave the wall, and if they touch the pipe line, lighting switch, etc. You can use professional tools to cut a good position, and then paving.
With regard to the related content of the tiling , I will briefly introduce it here and I hope to help you. If you need to learn more about the decoration information of ceramic tile, or need to know about other decoration, you can pay attention to our website, more exciting content, waiting for you.
Tile tile
PP Rod is a linear polymer with high density, no side chain and high crystallization,Polypropylene Rod has excellent comprehensive performance.
AHD produces only virgin grade resin without any recycle material added for PP rod.
China PP Rod has uniform in color,smooth surface,flatness,easy for installation and maintenance,long service life,easy processing and strong welding and other characteristics.
|
Product |
Diameter(mm) |
Length(mm) |
Color |
Density(g/cm³) |
|
PP ROD |
15-200 |
2000 |
Nature/grey |
0.92 |
PP Rod
PP Rod ,Polypropylene Rod, PP bar,Polypropylene bar, plastic pp rod,extruded pp rod
Shenzhen Anheda Plastic Products Co.,Ltd , https://www.ahdplastic.com