Smart lockers are not used but not open

This problem belongs to a relatively common problem. Generally encountered this kind of problem, usually there are two situations, the first is the system problems, the second is the operator through the abnormal opening of the smart locker , So what is the abnormal opening method? As managers all know, there is a mechanical opening behind the smart locker door panel, and there is a forced opening, these are abnormal opening methods, then how to solve this problem?
The first system is broken: then we can directly contact the manufacturer, first inform the question, and see if there is any solution, whether it is a problem with the circuit or the system is broken, if it can be solved by phone or video, if If it is not possible to replace the system, the after-sales company will send technicians to help everyone change the system.
The second type: abnormal opening, just above we also said that in the face of some unexpected situations, the administrator will use the machinery to open, for example, everyone lost the bar code paper, or scan code gun problems, ah, these times All of them can be turned on using machinery, but mechanically turning on will have the problems we mentioned above. That is to take items but still show them in use. This is definitely not good, because the consumers behind us still need to use this intelligence. Locker, then how to solve this problem?
Smart lockers

First, we entered the management system, and then we found the service item, which was the number of the cabinet. We entered the number of the cabinet so that the cabinet would be directly coded and could be used directly. However, one thing to note is that after clearing the code, The bar code paper can't open this cabinet again, so this management function needs to be used with caution.
The above is the solution that no one can use to open the smart locker. If you encounter any problems or do not understand anything during the operation, you can always consult us.

Non-Asbestos Rubber Sheet For Steam

Description:Made of excellent kevlar fiber with natural rubber and other chemical materials.Formed by rolling after special mixture treatment.It is mainly for such media as water and vapor and applicable to sealing and heat-insulation used in the industries as machinery, automobiles, farm, machinery and petroleum.

Usage:Suitable for ordinary water caliduct equipment and low pressure.for water and steam  transmitted in the joints of facilities and pipelines.

TEMP:200℃(max)

PRESS:1.5MPa(max)

Dimension:1540x1520mm(recommend)

 1540*1360mm  1540*1020mm

 Thickness:  0.5~6.0mm

Technical data:

Density g/cm3           1.6~1.8  

Tensile strength â‰¥Mpa        7

Compressibility â‰¥ %        12+/-5  

Recovery       â‰¥ %      40  

Aging Coefficient        0.9

Stress Relaxation â‰¤%     45

Steam Sealing Tmax:     200 â„ƒ Pmax:2~3Mpa 30min no shock  

Temperature Max.oC 200 

Pressure Max. Mpa 1.5 

Resistance to media Water, seawater, steam, fuel, gases, salt solutions

529553116841502326

Non-asbestos Rubber Sheet For Steam

Non-Asbestos Rubber Sheet For Steam,Non-Asbestos Rubber Gasket,Steam Non-Asbestos Rubber Sheet,Paronite Gasket Non-Asbestos Rubber Sheet

HEBEI HENGDA SEALING MATERIALS CO.,LTD. , https://www.hengdasealing.com

Posted on