Although the cool autumn season is the most suitable season for decoration, the climate in this period is dry, and wood panels are not easy to return to moisture, and paints and paints are easy to dry. Experts advise: Although autumn is good, but can not prevent "Qiuzao", if the decoration process is over-ventilated, it is prone to problems.
Wood to avoid strong ventilation: the dry climate in autumn, the experts suggest that after the wood transported into the decoration site, to avoid vents, and to seal oil on the surface as soon as possible. Because, if the wood used for construction is placed in a place with strong ventilation, the temperature and humidity on both sides of the wood will be different, the properties will become unstable, and the moisture in the wood will be quickly lost, resulting in surface cracking, small cracks, etc. phenomenon.
For the wood line used as the edge, the processing method is the same. The wood line is solid wood and the moisture content is higher than that of the veneer. After the wood line is finished, the surface must be oil sealed as soon as possible if the moisture in the wood line is lost. , The wood line will shrink, but also may affect the appearance of the veneer.
Wall treatment to increase the humidity: In order to avoid the wall paint blemishes, cracking, brush a wall to go all in one; paint, to wait for the primer to dry, and then brush the second time; after brushing, it is best to dry, avoid direct sunlight Wind blows to prevent cracking. In the summer, because of the dampness of the air, the doors and windows are open and airy to allow the walls to dry as quickly as possible. In the autumn, when the climate is dry, if the doors and windows are opened at that time, the freshly-painted walls will be blown dry and the walls will shrink and deform due to rapid water loss. Therefore, it is best to let the wall dry naturally, leaving only a small amount of air in the room during the drying process to allow air to circulate.
If the weather is very dry, then in the process of laying kitchen tiles, you should also add a program for moistening the walls of the water, so as to reduce the appearance of tile cavities.
Ventilation time should be chosen sooner or later: the autumn season, dry weather is very suitable for the release of harmful gases, and strong air flow, it will make the indoor smell smell is not very clear. In addition, the release of harmful substances has a certain period of time, so it is recommended that everyone, even if there is no taste in the room, still have to wait another two weeks to one month or so.
During this period, you can properly ventilate your windows. The best time is to choose between morning and evening. At noon, the humidity is relatively small and relatively dry, which can easily cause cracks in wood and wall paint. In addition, if the wind is heavy, then you also need to pay attention to the method of opening the window, try to avoid the formation of a relatively violent hallway.
Do not worry about repairing cracks: summer air humidity, wall, floor, wood furniture contained in the water are relatively large, with the change of seasons, temperature, humidity, interior decoration is likely to have some problems. If the wall and the door frame are of different materials, the shrinkage rate is different, and there may be gaps. These are normal phenomena that occur during the season transition.
Experts suggest that for projects that require maintenance, such as seasonal cracks on the walls, do not rush to repair them immediately. Cracking indicates that the moisture in the wall is gradually evaporating. If it is repaired at this time, the water will continue to evaporate and the wall may continue to crack. If you wait until the water in the wall is balanced with the outside world, repair it again and you will have better results.
Construction acceptance paint window interior decoration room coating
U Bend Tube are produced by bending from straight steel tubes,so,is also called U Bend Steel Tube,and with length over 12000mm.
and are commonly used in heating or cooling process fluids and gas,.
Material:
Stainless Steel
Duplex Stainless Steel
Carbon Steel
Alloy Steel
Applications for:
Boilers
Shell & Tube Heat Exchangers
Heat Exchangers
Cooling Systems
Cold Condensors
Condensor Steam
U Bend Tube
U Bend Tube,Steel U Tube,U Bend Pipe,Heat Exchanger U Tube,U Bend Steel Tube
Torich International Co.,Ltd--The Steel Tube Maker , http://www.chinasteeltubepipe.com