Everyone knows one of the important parts of our entire renovation process when we decorate the wall. We also want it to be more beautiful in this part of the decoration. For those who don't know how to decorate, they don't know how to do it. So everyone knows what is the renovation steps for the new house wall? Today, Xiaobian will take a look at the new wall renovation steps and the new house wall decoration points!
What is the wall decoration step?
1. The surface layer should be observed first, and then solved according to the situation. If it is rough cement, check whether it is flat and strong, whether there is an empty drum phenomenon. If there are cracks, holes or hollow drums, then it should be developed. If the manufacturer reflects and asks for repairs; if it is a white wall, then its quality is very important for long-term living. Try its water resistance. If the water resistance is not good, it is best to shovel it and do it again, otherwise it will peel off in the future.
2. Whether it is the inspection of the surface layer or the protection of the finished product, it is the preliminary work. Although it is the preparation stage, it cannot be ignored. At this time, both the woodwork and the floor tiles have entered the site, and all need to be protected because of dust, paint and other things. It is easy to cause pollution to objects.
3. The sealing layer treatment is to block the base layer, which can prevent the floating soil or dust from being strong and increase the construction difficulty. Generally, there are two ways. The first one is for cracks, holes and slots, and is made of gypsum products. fill
The other is for the insulation wall surface, the loose wall surface, the cracked wall surface, and the solid sealing with kraft paper, and any one can be selected according to the situation.
4, followed by leveling, if the surface of the wall is very poor, the difference is >5mm, then it is proposed to use thick leveling, so the construction only needs to scrape once, but try to be thin, too thick and easy to cause the wall to crack later. .
5, this process is carried out when the flatness difference of the outer surface of the wall is <5mm, usually it needs to be scraped 2-3 times, it should be uniform and flat. If it needs to be painted later, it should be polished with fine sandpaper first, smooth and smooth. The wall paint from the wall is better.
6. After rubbing the thin sandpaper, clean the dust on the wall and then brush the paint on the bottom. Generally, it only needs to be applied once, but it takes 2-4 hours to dry evenly. Go to the next step.
7, then apply the surface paint, construction twice, the first process can be carried out after the first dry, generally takes 2-4 hours, of course, due to weather conditions, brush the second time it takes 1-2 days to completely Dry, the process should pay attention to dust, sunscreen and waterproof.
Wall decoration points
1. Use of interface agent: Close the base layer to prevent the putty from appearing due to the loose wall, floating soil or over-drying of the cement wall. The surface is more suitable for the placement of putty than the cement wall.
2, if you do not intend to brush the interface agent, be sure to pay attention to the following text: summer construction, the wall is relatively dry, the roller should be washed once before the construction (no water), to prevent pinholes or cracking due to excessive water absorption.
3, the new cement wall (such as the developer redo plaster), must wait until the 28-day curing period of the cement has passed, can put the putty, otherwise it is easy to appear putty bubbles, insufficient strength.
4, patch (kraft paper): its main role is crack resistance, high cost, the general wall is not necessary to do. However, for insulation walls, loose walls, and cracked walls, the effect of the patch is more obvious and can be considered (I will discuss this in detail later).
When decorating a wall, you need to have a certain understanding of its details, and the steps are one of the issues that we all need to consider. The above is what the small room wall decoration steps introduced for you today and the new house wall decoration points are here. To learn more, please continue to pay attention to the decoration home.
More related wonderful reading:
New house wall decoration steps New house wall decoration considerations
Aluminum Coil,Aluminum Coated Coil,Aluminum Roofing Material,Prepainted Aluminum Coil
SHAOXING YOTO IMPORT&EXPORT CO., LTD , https://www.sxyoto.com