For bathroom tile laying , every procedure should be very important, as it will directly affect the use of bathroom functions. Tiles , whether it is selection, construction process, or construction supervision are very important. How to choose a suitable bathroom waterproof material, using the fastest and most cost-effective way, paving the bathroom in line with the needs of the owners? Next, Xiao Bian will share the notes on the four major bathroom tiles .
First, the purchase of materials - size lighting should pay attention
Many owners choose ceramic tiles only according to their preferences. In fact, the purchase of bathroom tiles needs to be selected according to the lighting, size, and degree of moisture of the bathroom. When purchasing, it is necessary to see the quality, size, and radiological health certification of the materials. Select the color and surface of the tile according to the lighting of the bathroom. For poor lighting, bright white glaze tiles such as beige are to be selected. Glazed tiles are divided into light and matt: bright glazed tiles, suitable for creating "clean" effects; matt glazed tiles, suitable for creating "fashionable" effects.
Second, pre-construction preparation - material handling properly
The so-called "Three Armies are not moving, and food and grass work first". If you want to accomplish an outstanding job, you must do a good job of preparation in advance. Pre-construction preparation requires attention to material preparation and tool preparation. When tiles are tiled, the fit of the tile to the wall is greater than the gravity generated by the tile itself. Because the ceramic tile itself has many small holes, strong water absorption capacity, dry tiles will dry the moisture of the cement, making it less fit, hollowing and falling off easily after laying. Therefore, the tiles must be soaked for 24 hours until no blisters appear, then they are allowed to dry and then spread.
Third, the details of the construction - even care should be cautious
The paving process is very important, which directly affects the paving effect of the bathroom tile surface. There are many small details to pay attention to when laying tiles. When laying tiles, the humidity of the cement mortar should be well controlled. Too dry or too wet can affect the adhesion of the tiles to the wall surface. The cement mortar needs to be evenly and thoroughly applied to the back of the tiles, avoiding only four weeks. After the tiles are put on the wall, they need to be hammered with a rubber mallet. At the same time, check the smearing of the tiles and add or reduce the cement in time. This process needs to be repeated until the tile is evenly attached to the wall.
Fourth, pay attention after construction - do not ignore the inspection and maintenance
After the tiles are finished, the maintenance of the tiles is also an important part of the construction. Doing a good job of protection can prevent bricks from being damaged before use. After the tile is tiled for 1 hour, use a towel to clean the brick surface of cement, caulking agent and other stains. Do not clean it with steel balls afterwards, as this can easily damage the brick surface.
Editor's summary: About the four major bathroom tiles section of attention to the introduction to here. For more information, you can follow this site information.
Tile Tile Tile Bathroom Tile Color Toilet Waterproof Toilet Waterproof Material Bathroom Tiles Bathroom Size ld Tile
150mm (6 Inch) Flat Cut-off Disc
B&H TOOLS CO., LTD. , https://www.bandhtools.com