Decoration makes people take experience in regret

One of the biggest mistakes of my family is that the three drawers in the storage room are too high, and the top drawer is invisible when it is opened. 555555... At the time of design, the designer said that the drawer is best placed in the middle, and I did not care too much about this detail and believed him. As a result, hey. . . Before my work started, I used the pencil on the wall to draw some designer's plans according to the actual size. I felt a lot and made a lot of changes. Now think about it, this step is very important. What you see on the drawings is very different from what you see on site, or whether it feels good on the spot.
The storage cabinets and drawers of the workers are all relatively high. They should be noted before they are used as cabinets. It should be better that the height should be less than 1.1 meters. However, no attention has been paid to the north balcony laundry pool and mop pool. Forgot to shop hot water pipes, now think about the winter after the cold winter wash Dongdong, the pain of death on the balcony is best to install a sitting mop pool faucet to be set according to the height of the mop pool, too high and old splashes of water.
My northern balcony originally believed that the Shuidiandian nonsense, there was no floor drain. Only the drains of the washing machine were working on the balcony sink and washing machine, and the best wall ground was tiled. In order to save the rice, the half-high wall brick balcony was stuck. The paved bricks have water in the summer and the north balcony that raises mosquitoes does not use a mop pool and uses a sink. As a result, the mop is washed too high, the laundry is too short, and the water splashes are so bad that the laundry on the north terrace is cleaned. It's so wise to leave the bucket in the room as a laundry table. It is used every day now and it is very convenient to use.
balcony:
- The northern balcony of my house was opened to more than 400 yuan per square meter (CK). After closing the south balcony, listening to the low prices on the market, I moved my heart. I and the whole community of LP turned and specifically knocked. The doors of the homes that closed the balconies. It really gave us a good feeling seal, and the work was not very rough. (In fact, it was the best of the three or four non-invented/Fende balconies I saw. One of them. Immediately let the boss measure, start (250/m2). In fact, the boss is really a real person, not a traitor, but after I finished it, it was a lot of problems. Actually, it's better than me. Some of the other families are still better, but compared with the opening of the north, it is really not a grade. I have seen:
1) Use an ordinary tape measure when measuring the size. CK is an instrument that maps similarly to maps. The funky building is often skewed and the measuring tape does not come out often. I have two pieces of glass and must be redrawn.
2) The window switch is difficult. The workmanship and quality of various small parts are rough
3) There are small handles on each window of CK to help push the window. But my family does not.
4) The foaming agent is rough, and the quality is not good. Some areas leak water.
5) The distance between the following glass is very large, thanks to the silicone
6) The level of playing silicone is limited. Fortunately, Dad is engaged in advertising, telling me to first use masking paper (a kind of paper tape) paste well, so that silicone will not play sturdy.
7) The airtightness of the window is not good, although there is no water leakage, but the loud noise on the balcony when the wind blows is frightening. This is also the most unpleasant place for the monks.
8) Do not pay attention to the construction, stick the powder of the grinding wheel aluminum alloy to the floor tile, and then remove it after cooling!!!!
Now my LP can only comfort me that saving a thousand or two thousand dollars will inevitably come at a price. In fact, the price/performance ratio is not too bad. My personal experience here is that some small workshops and engineering teams in the market are Can't do anything good for the balcony. If you can't get used to those minor problems, it's still a hassle for a formal company to do. And there is a warranty, on call.****

- When installing drying racks, consider that the poles should not be too close to the glass windows after closing the balcony.

- I used to put a hundred curtains on the balcony and later found it to be the biggest mistake. Since the curtains are required to be floor-standing on the balconies, the drawstrings are long and long. When you pull the curtains up, the rope will drag about half a meter to the ground. It is simply guilty. The same goes for the roller blinds. So the last one was demolished, or with ordinary cloth curtains. *****
The switch socket puts the outlet behind the door. There is no single outlet in the large stairwell, and the cutting machine must pull the line from the bathroom when laying floors. It is inconvenient to think about using a vacuum cleaner afterwards. . .
A lot of glass decorations were designed. However, it was found that several places were easily bumped. No matter if the glass was broken or not, it was very dangerous. I just trusted the designer too much. For the time being, I didn't say creativity, let's say the size, the designer himself Lack of life experience, the size of the design is not correct, the construction of the workers according to plans, made things to make people laugh and laugh. Later, I had a habit of measuring the size of something in my residence. Then I went to my new home and measured it for comparison. There was a place where the size was wrong and I quickly reworked.
There are too few sockets, and the location doesn't consider thoughtful sockets. We must consider them in advance. When we were at home, we considered a lot of sockets, but now they are all blocked behind the furniture. (So ​​it is recommended to look at the furniture first, then design)!
There may be problems with the outlet, and there is no double-hop switch. No matter how good the brand is, even if it is world-class, it must be carefully inspected when it arrives home. Most of the time, the delivery person will linger beside you, let you hurry up, do not scold him, and insist on your right to inspect. And be careful. I just bought a lot of branded goods and I couldn't identify myself because of various reasons. Unfortunately, there are many problems. Regret it. Careful inspection bar tiles I think we will not be a piece of a test, but the four corners are easy problems, especially if the piece of hardware, no matter the size, the outside is very easy to hurt the bathroom three-piece, although the packaging is tight, but also Take it apart to see if there is a crack or a flaw you can't accept. Lamps and tubes must be lighted one by one.
Before the renovation, it is best to look at the furniture, think about where to place the wiring, where there is a light, and where to leave it empty.
The location of the outlet is critical. Without prior consideration, there are often two consequences: too little or too little to fit, and too little to say. The wrong location can cause: and other equipment and furniture. ** Or blocked by other equipment and furniture, it is useless.
Solution:
1, sockets should be installed, rather than lack of abuse;
2. Think about what kind of winter and winter you might buy after three years or even five years. How are these winters used? Where do you plan to use them at home?
3, before the renovation of the furniture is basically set, size, location are determined, so that the socket is absolutely impossible to waste, but I think 99% of people can not do this, so have to install the socket forever Not psychologically prepared.
My family's workers are really careless. I ordered Simon's switch, a 16A three-eye socket for air conditioning, and a 10A three-eye socket for microwave ovens, washing machines, and so on. When the workers are installed, they will be counted up. When I arrived at the new house after work, I found that it was basically wrong. Because the light can't see the model from the panel, it can only be removed one by one. See what the current is and reinstall it. There are home dual dual control switch and dual single control switch, the workers also installed wrong, number in this relatively easy to distinguish, single control of the red dot above, dual control is not. Workers have no sense of responsibility. They just want to finish it. It's annoying.
My house was renovated for two months. I was looking for a package contractor and many of my experiences wanted to tell everyone:
1) The premise of clearing is that you have time, stamina, endurance + long enough to dive on the fence; otherwise it is not qualified and the contractor will fight with his head. Although the material is bought and bought with confidence, the worker is arranged by the contractor. He will deduct as much as possible, so the worker will be able to do nothing if he does not. And the time will not be arranged according to the normal process, he will arrange the work order for his convenience, but also annoying.
2) If there are no special requirements for the design of the house, but the material requirements are relatively high, then find B&Q O'Brien's flow, the material is expensive but rest assured, the construction is also standardized; if you want to design more perfect, we must design a decoration Get it, can not be separated, otherwise it will wrap.
3) The design of switch sockets is more than simple, simple, no effect, or inconvenient; complicated, it must be from the perspective of use, otherwise it will not be able to find the switch (the switch is not familiar with now).
4) Sanitary ware should also be well-selected and arranged for drainage and water pipes. Otherwise, it would be difficult to see if you would need to pick up a lot of pipes. You should also look for sanitary ware to find someone who is knowledgeable, and some of them look good. It may not be able to install (our American standard new basin bought by our family, the design is absolutely poor, and the workers will be settled for one night only)
5) If you hate the color difference, you can choose the door, door pockets, window covers, and baseboards with the same material and the same manufacturer. It's very worry (I've chosen Anyang, which is too expensive, and other services are very satisfied)
6) The cabinet I chose to buy a good decoration, very satisfied, from design to installation, did not let me worry about.
7) In addition to the arrangement of water pipes, attention should be paid to the height of the water pipes buried in the wall leading to the faucet. Otherwise, the installation height of water heaters and washing machines may be affected.
8) During the construction process, you should stare more and workers will be lazy. If you do not find it right, you must request to change it or redo it. The later complaints are useless and can only make everyone angry and the problem cannot be solved. (
Hey, it's still an old saying. Decoration is a regrettable thing. Even if you have a lot of money, you must remember that you don’t want to buy everything that is the most expensive, such as aluminum gussets. No one pays attention to it and it doesn’t matter; To buy good, or else every day to take a bath every day regret. Floor board paint board can be, prime board must measure the moisture content! Requirements can be used to qualify, spread out the effect is not worse than the paint plate. Lighting installation is very simple, if you do not like it, too late to change too late, do not buy too expensive, or replacement costs are too high. Tiles just like the color pattern on the line, buy expensive boring, like to shop on the wall.
Remodeling common problems example Dr. Decoration 2004 published in SouFun community - decoration forum forum

Many homes are renovated and often find this or that problem. To this end, we have deliberately edited this article, I hope readers learn. First, the ceiling project 1, paper gypsum board ceiling: the surface is uneven, there are cracks. 2, mineral wool sound-absorbing board ceiling: bump, uneven, patchwork is not straight, lax, uneven seam, pollution, pattern asymmetry. 3, metal ceiling panels: color, surface roughness, seam warping, joints are not straight, bump. 4, plastic board: uneven, joints are not straight, strict, the border is not straight, not strict. 5, gypsum board: uneven, joints are not strict, not straight, uneven seam, the pattern is not clear, asymmetric. 6, ceiling keel: uneven, not straight, lax, not strong, uneven arch. 7, equipment installation port: Lax, incorrect, asymmetric, uneven arrangement, uneven intervals.
Second, the ground project 1, natural stone: color, joints lax, uneven texture, anti-flower, bump, mirror finish poor, pollution, uneven joints. 2, glazed tiles: bumps, color, glazed tiles cracks, uneven, joints are not strict, not straight, uneven, activities are not real, pollution. 3, cement surface: cracks, sub-grid moldings are not straight, incomplete display is not clear, hemiplegia, color, stone uneven distribution, color pollution, surface fade, poor surface finish. 4, artificial marble: uneven, warping, cracking, fade, fade, pattern is not smooth, seams are not straight and uneven.
5, wooden floor: color, joints are uneven, not straight, strict, cracks, warping, walking noise, the skirting board is not perpendicular to the ground, the surface is uneven, there are high and low levels. 6, plastic floor: the separation of the floor and the base layer bonding points, bubbling, staggered seams, patchwork, strict, not straight, fade, pollution, scratches, pattern asymmetry. 7, carpet: uneven, from the drums, wrinkles, inconsistent colors, flanging, curling and so on.

It is recommended to install more outlets. It is best to have more than a few places on the wall. Even if you do not use it at the same time, you can leave room for the future change of furniture. I have fewer network interfaces. Later, there is no way to buy a wireless network card. +hub, more than 500, but also added a ground outlet expensive, because the furniture position to block the interface, and the computer is generally a row of sockets together, together to block, and do not put the socket in the bed behind the door It's simply not as good as it needs to be set. The line with the best luminous switch must be more than one row. The hose of the toilet valve must be bought with good quality. The best is the hard pipe. The same is next to the switch valve next to the water heater. Affect the amount of water, the living room lamp slot to install fluorescent lamps as much as possible, has always been yellow spotlights or chandeliers and other reading things to see what is very tired, try to design more storage cabinets, things are always more and more, will not always be romantic The newly-married, hood can deep cover as deep as possible, the European style is definitely not in line with the country's cooking habits, after a year you will find light beautiful will regret it. Unless you do not cook at home, can not afford pan, try to Do not open style, at least glass doors available Switch, .........

Balcony Villa Design Socket Switch Window Decoration Design Furniture Living Room Wall Color Living Room Lamp Plasterboard Ceiling Price Decoration Living Room Roller Shutters Drawer Cabinets Cabinets Doors Marble Tiles Glass Cabinets Glass Furniture Cabinets Doors Glass Tiles Marble Cabinets Floor Tiles Shutters Curtains Glass Doors Continental Bathroom Toilets Tiles Bathroom Doors Bathroom Tiles Color Tiles Bathroom Tiles Bathroom Sizes Bathroom Tiles Bathroom Ceiling Tiles Bathroom Ceilings Toilet Design Toilet Doors Sizes Toilet Tiles Tile Tile Price Tile Tile Tile Tiles