The regret tells: When the decoration is catching up with the winter, so did not think to want to hit the air conditioning hole, wait until the summer to air conditioning when the hole that is hit now. When the hole was drilled, the drill went up and made the wall in the bedroom a big face. It was very ugly.
Unfortunately remedy: As the use of rhinestones for air conditioning holes will stain the walls, it is advisable to consider the location of the air conditioning and the height of the suspension when decorating. If you decide to use air conditioning, it is best to beat the air conditioning holes before blowing white. it is good.
Regret 2: Unreasonable power supply location
Regrets to tell: The bedroom did not measure accurately when wiring, but roughly visually, put the location of the power socket. As a result, when the computer desk was bought and returned home, it was discovered that the position of the table leg was just blocking the position of the power outlet. There was no way to replace it with a socket, and the line went out.
Unfortunately remedy: Before arranging the position of the bedroom power outlet, the dimensions of the furniture to be placed should be provided to the electrician as accurately as possible. In addition, under the premise of not affecting the appearance, as many as possible to reserve a few outlets, sooner or later in the future to use.
Regret 3: The top light did not make a double control
Regrets about: After six months of renovation, I heard that the ceiling light can be double-controlled, with a switch beside the door and a switch beside the bed. This saves you from lying in bed and turning off the lights in the winter.
Unfortunately remedy: During the renovation process, communicate with friends and worker masters to find a fitting solution suitable for your home. If you can not do double control lights, you can install the controller on the ceiling light, turn the top light into a remote control, can also achieve dual control effect.
Air conditioning entrance decoration socket switch interior decoration furniture bedroom lamp
Welded Wire Mesh is rolled. It is formed by welding low carbon steel wire or Stainless Steel Wire . It includes hot-dipped galvanization, electro galvanization, PVC-coated, PVC-dipped, special welded Wire Mesh . It capability is high antisepsis and oxidation-resistant. It could be widely used as fencing, decoration and machinery protecting in industry, agriculture, construction,traffic and transportation, mining,court, lawn and cultivation, etc.
Hot-dipped Galvanized Welded Wire Mesh
Electro Galvanized Welded Wire Mesh
Stainless Steel Welded Mesh
Heavy Welded Wire Mesh
PVC Coated Welded Wire Mesh
Welded Wire Mesh Products
Welded Wire Mesh Products,Welded Wire Mesh Roll,Welded Wire Mesh Panel,Welded Wire Mesh Container
Shijiazhuang Junyangyuanyu Import & Export Trade Co., Ltd ,