Home>Bearing knowledge>Sequence process of SKF bearing finishing |
SKF bearing finishing sequence process
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
The first process: when the surface of the grinding stone of the SKF bearing is touched with the peak of the rough raceway surface; because the touch area is more than that of the ノ ノ 婊 氖芰 氖芰 螅 螅 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔“ SKF bearing workpiece "anti-cutting" effect; some abrasive particles on the surface of the grinding stone fall and chipped; reveal some new sharp abrasive particles and edge. Together; SKF bearing workpiece's appearance peak is exploding Cutting; the effect of cutting and anti-cutting removes the peaks on the surface of the SKF bearing workpiece and the grinding of the enthalpy layer. This period is called the cutting period; during this period, a large amount of metal allowance is removed.
The second process: the half-cutting of the SKF bearing continues with the machining; the surface of the SKF bearing workpiece is gradually smoothed. At this time; the touch surface of the grindstone and the workpiece is added; the pressure per unit area is reduced; the cutting depth is reduced. Together; the pores of the grindstone are blocked; the grindstone is in a half-cut condition. This period is called the half-cutting period of the SKF bearing finishing; during the half-cutting, the SKF bearing workpiece has a shallower cutting mark; Luster.
The third process: during the finishing period, this is the final process of superfinishing of SKF bearings. The surface of the workpiece is gradually smoothed; the touch area of ​​the grinding stone and the external appearance of the workpiece is further increased; and; the appearance of the grinding stone and the SKF bearing workpiece Gradually blocked by smooth oil film; the pressure per unit area is very high. Xing 髯饔 髯饔 跣 詈笞 V V V V . 这一 这一. This period we call the finishing period. During the finishing period, there is no cutting mark on the surface of the workpiece; SKF bearings appear Shine product gloss.
Recommend to friends comments close window
Bearing related knowledge |
Grease smoothness of bearings in wet environment Several typical dynamic pressure bearing layouts and functions of using spindle bearing oils Inch tapered roller bearings LM11749/10 Interpretation of RHP BSB150 SUH P3 bearing type |
This article links to http://
Please indicate the bearing network http://
Previous: Common Methods for Distinguishing Bearing Quality Next: Classification and Function of Imported Bearing Preload
Our Bolt Clipper And Cutter are served to cut off various cable wire ropes, more fast, convenient and all are very light.
Our chain wire clipper possesses the item number of 16271 and the weight of 5kg. It is desirable for cutting off the aluminum conductor steel-reinforced with its specification of LGJ400 or below.
High Strength Hydraulic Hand Crew Cutter and Nut Splitter
Notes: For cutting rusty nut, packaged in plastic box.
Item number Applicable nut Maximum force (kN) Length(mm) Weight (kg) Remark
16292 M12-M24 100 500 5.5 Hydraulic style
Specifications
Item number Applicable conductor Length (mm) Weight (kg)
16271 ≤ACSR400 ≤GJ95 720 5
Bolt Clipper And Cutter
Bolt Clipper,Bolt Cutter,Electric Wire Clipper,Electric Wire Shear,Pliers And Shears,Hydraulic Cutter
NINGBO MARSHINE POWER TECHNOLOGY CO., LTD. , https://www.marshine-power.com