Product Description
  Thickness :  SCH10,20,30,40,60,80,100,120,160,STD,XS,XXS or as requirement
  Outer Diameter:   18mm --219 mm
   Length:     2m -12m or on the request of clients
  Pipe section: Round
   Standard:   JIS G3444Â
   Pipe end:plain or bevelÂ
   Packaging details: in bundle,Plastic Caps, Beveled or as the requirments of the customers
   Trade term : FOB, CFR, CIF.
   Payment term:  T/T, L/C
Â
Product Name | STKM11A steel pipe | STKM12A steel pipe | STKM13A steel pipe | STKM13C steel pipe | STKM14B steel pipe |
chemical analysis | C:≤0.12;Si:≤0.35;Mn:≤0.60;P:≤0.040; S:≤0.040 | C:≤0.20;Si:≤0.35;Mn:≤0.60;P:≤0.040; S:≤0.040 | C:≤0.25;Si:≤0.35;Mn:0.30-0.90;P:≤0.040;S:≤0.040 | C:≤0.25;Si:≤0.35;Mn:0.30-0.90;P:≤0.040;S:≤0.040 | C:≤0.30;Si:≤0.35; Mn:≤0.30-1.00;P:≤0.040; S:≤0.040 |
Tensile Strength | ≥290MPa | ≥340MPa | ≥370MPa | ≥510MPa | ≥500MPa |
Yield strength | - | ≥175MPa | ≥215MPa | ≥380MPa | ≥355MPa |
Standard | JIS G3445 | ||||
Length | As customer's request | ||||
Packaging | Standard export packing, packed in woven bags, with two nylon slings, or can be customized as request | ||||
Heat Treatment/     Delivery Condition | Cold finished (hard)  BK(+C) Tubes do not undergo heat treatment following the final cold forming and, thus, have a rather high resistance to deformation Cold finished (soft)   BKW(+LC) The final heat treatment is followed by cold drawing involving limited deformation. Appropriate further processing allows a certain degree of cold forming (e.g. bending, expanding) Cold finished and stress-relieved annealing BKS(+SR) Heat treatment is applied following the last cold forming process. Subject to appropriate processing conditions, the increase in the residual stresses involved enables both forming and machining to a certain degree. Annealed   GBK(+A) The last Cold forming process is followed by annealing in a controlled atmosphere. Normalized  NBK(+N) The last cold forming process is followed by annealing above the upper transformation point in a controlled atmosphere. |
||||
Delivery Time | Within 35-50 days from receiving deposit | ||||
Payment Term | 100% L/C at sight or 30% deposit, 70% balance against copy of B/L | ||||
Usage/Application | Pipes for automobile and motorcycle | ||||
Main Market | Asia, Middle East, Europe, etc. |
Product Description
  Thickness :  SCH10,20,30,40,60,80,100,120,160,STD,XS,XXS or as requirement
  Outer Diameter:   18mm --219 mm
   Length:     2m -12m or on the request of clients
  Pipe section: Round
   Standard:   JIS G3444Â
   Pipe end:plain or bevelÂ
   Packaging details: in bundle,Plastic Caps, Beveled or as the requirments of the customers
   Trade term : FOB, CFR, CIF.
   Payment term:  T/T, L/C
Â
Product Name | STKM11A steel pipe | STKM12A steel pipe | STKM13A steel pipe | STKM13C steel pipe | STKM14B steel pipe |
chemical analysis | C:≤0.12;Si:≤0.35;Mn:≤0.60;P:≤0.040; S:≤0.040 | C:≤0.20;Si:≤0.35;Mn:≤0.60;P:≤0.040; S:≤0.040 | C:≤0.25;Si:≤0.35;Mn:0.30-0.90;P:≤0.040;S:≤0.040 | C:≤0.25;Si:≤0.35;Mn:0.30-0.90;P:≤0.040;S:≤0.040 | C:≤0.30;Si:≤0.35; Mn:≤0.30-1.00;P:≤0.040; S:≤0.040 |
Tensile Strength | ≥290MPa | ≥340MPa | ≥370MPa | ≥510MPa | ≥500MPa |
Yield strength | - | ≥175MPa | ≥215MPa | ≥380MPa | ≥355MPa |
Standard | JIS G3445 | ||||
Length | As customer's request | ||||
Packaging | Standard export packing, packed in woven bags, with two nylon slings, or can be customized as request | ||||
Heat Treatment/     Delivery Condition | Cold finished (hard)  BK(+C) Tubes do not undergo heat treatment following the final cold forming and, thus, have a rather high resistance to deformation Cold finished (soft)   BKW(+LC) The final heat treatment is followed by cold drawing involving limited deformation. Appropriate further processing allows a certain degree of cold forming (e.g. bending, expanding) Cold finished and stress-relieved annealing BKS(+SR) Heat treatment is applied following the last cold forming process. Subject to appropriate processing conditions, the increase in the residual stresses involved enables both forming and machining to a certain degree. Annealed   GBK(+A) The last Cold forming process is followed by annealing in a controlled atmosphere. Normalized  NBK(+N) The last cold forming process is followed by annealing above the upper transformation point in a controlled atmosphere. |
||||
Delivery Time | Within 35-50 days from receiving deposit | ||||
Payment Term | 100% L/C at sight or 30% deposit, 70% balance against copy of B/L | ||||
Usage/Application | Pipes for automobile and motorcycle | ||||
Main Market | Asia, Middle East, Europe, etc. |
Royal Brick Texture PU Sandwich Panels
Royal Brick Texture PU Sandwich Panels
Rich selection of textures and colors meet different decoration requirements, giving the city and the buildings a new look.
The PU foam is the most advanced and eco-friendly insulation material in the world. With the help of the back aluminum foil, the thermal preservation effect achieves the best.
The unique structure prevents the heat loss in winter. Meanwhile it reduces the heat of the summer sunshine.
Aceta paintcoat and flurocarbon paint of weather resistance performance are applied on surface of wall panel. It is reserved with superior self-cleaning, weather resistance, corrosion resistance and acid& alkali resistance performance.
Light weight with 3.7Kgs/m2 makes the installation easy.
The installation process is clean and tidy without any noise and dust, construction waste.
Different selections of accessories meet different effects.
High quality and stable performance: Manufactured in CNC automation production line, the product pass rate can reach 99.9% with stable chemical structure and physical structure.
Brick Wall Panels,Metal Insulation Decorative Boards,Pu Foam Sandwich Panels,Royal Brick Texture Pu Sandwich Panels
Jinan Zhengtang Insulation Decoration Material Co.Ltd , https://www.ztwallsiding.com