Easily distinguish whether NSK bearings can be reused

Source: China Bearing Network Time: 2013-04-06

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

[Daily Bearing Network] NSK imported bearings are attributed to fine parts. NSK imported bearings are widely used; their application fields mainly include automobiles, motors (motors), gear equipment, injection molding machines, machine tools, mining machinery, construction machinery, motorcycles. , office equipment, paper machinery, pumps and compressors, railways, semiconductors, metallurgical equipment, wind turbines, etc.
It is precisely because NSK imported bearings are widely used; therefore, the bearings are abnormal, faulty problems and repairs are often found. So how to distinguish the bearings can be used again? Is there a trick?
After analysis and experience, when NSK bearings have the following shortcomings, they can no longer be used continuously; new NSK bearings should be replaced immediately. The details are as follows:
Cracks or nicks on either the inner ring, the outer ring, the roll body, or the cage,
Cracking on any one of the ferrule and the roll body,
Significant jams on the raceway, ribs, and rollovers.
The cage wears significantly; perhaps the rivets are significantly lax,
There is rust and injury on the raceway surface and the rolling body.
Severe indentations and marks on the raceway surface and the roll body.
There is significant creep in the inner diameter surface of the inner ring or the outer diameter surface of the outer ring.
The color change due to heat is significant.
When NSK imported bearings show the above situation, please do not continue to use; should replace the new NSK bearing immediately.

Recommend to friends comments close window

Bearing related knowledge

The hardness of the rolling bearing is in the grinding process (1)
The method of distinguishing bearing quality The disadvantage of bearing surface grinding is that the self-smooth bearing will become the leading product of bearing occupation.

This article links to http://
Please indicate the bearing network http://

Previous:The operating conditions and environmental conditions of the bearing: The method of extending the life of the forklift from the bearing life

A shark suit is a body-cover suit designed to protect a diver against shark bite. This is a new special chain mail marine shark suite protection made for dive not only with normal sharks but also with Great White shark. Each ring of the Ring Mesh Shark Suit was welded individually with a more than 200 N tensile strength and what is more the ring mesh enjoyes a 4 in 1 interclocking construction that make our suit can offer the ultimate protection against the sharp bit.

Ring Mesh Shark Suit

Ring Mesh Shark Suit,Ring Mesh Shark Suit,Best Shark Suit,Shark Suit Supplier

Sino(Beijing)Technology Co.,Ltd , http://www.dubetterglove.com