[China Aluminum Industry Network] (1) Strength and hardness are lower than that of copper, and the machinability is better. (2) The knife is easily sticked during the processing, and the cutter surface becomes rough. (3) The structure is not dense enough. Less roughness (4) Tool life is generally higher (5) Deformation is likely to occur during carding and machining, and the surface of the workpiece is easily scratched or scratched (6) The expansion coefficient is greater, affecting the dimensional accuracy .
Features:
1. It is very easy to install Ramming Pole Mounting System. You should insert vertical pillar into ground by Pile Driver. (The depth can reach 1500-2000mm).
2. High adaptability
The ramming pole mounting system can be widely used different geological conditions. Besides, the installation is free from seasonal change.
3. Environmental-friendliness
There is no much preparation for installation and piles can be recycled. It had no damage and no corrosion to environment.
4. Ramming pole can be easily installed and removed.
5. The ramming pole mounting system areas with low rock content to reduce cost on base construction and to shorten installation time.
Single Ramming Pole Mounting System
Solar Panel Pole Mount,Solar Panel Mounting Brackets,Ground Mounting System,Solar Panel Stand,Single Ramming Pole Mounting System
Hebei Honde Plastic & Metal Co., Ltd. , http://www.foundation-system.com