Several cases of heating
There are three general conditions for heating in Jinan radiator: 1 inlet water temperature 95, outlet water temperature 70, 2 inlet water temperature 75, outlet water temperature 57, 3 inlet water temperature 55, and outlet water temperature 45. The importance of the inlet water temperature can be seen.
Preparation before heating
First of all, check the indoor radiators one by one, check the indoor heating system valve, whether the manual running wind is intact, whether it is in the closed state, can be opened only when the hot water is injected; check whether the connection point of the indoor heating system is intact, avoid running, take the risk , dripping, leaking; check whether there are hidden dangers such as obstructing heat supply and repair; during the hot water injection, the user should be observed in the home; when the heating system is watering, manually release the air and see the water.
What to do if it is not hot
First of all, we must find out which heating unit is supplying heat. In principle, who is responsible for it; secondly, it is reflected to the relevant units that build this building, and they are responsible for handling it. If the residential pipeline is in disrepair or misalignment, it shall be repaired and adjusted by the property owner.
What to do with water leakage
First, in time, place a container that can hold water under the leak. If the water splashes around, use a towel to wrap the leak and bring it into a container of water. Users of household control should close the two valves (indoor total valve) at the entrance of the indoor pipeline in time. The old system has a control valve to quickly close the Jinan radiator control valve. When the Jinan radiator http:// does not control the valve, if the situation is particularly urgent, you can quickly close the front valve of the building with the help of others, and call the service person of the external network maintenance personnel in time.
How to judge water seepage
For slight water seepage (about 5 drops per minute), the user can use the water receiver to pick up water. As the water supply temperature increases, the water seepage may be reduced. More than 10 drops are water seepage phenomenon, which can be observed for about 3 to 5 days according to the actual situation. If the water seepage phenomenon is reduced with the temperature change, the user can use the water receiver to receive water. If the water seepage is serious (more than 10 drops per minute) Contact the relevant unit for repair in time.
Can the water in the heater be placed?
The water in the heating is softened water that has been treated with anti-corrosion treatment. Chemicals are added. The use of this water is harmful to health. Moreover, if the water is lost in the heating pipe, the heating system will be plugged and the heating effect will be affected. The large loss of water in the heating will affect the pressure and flow of the entire system, which will inevitably affect the heating temperature.
Dye Intermediates,Dyestuff Intermediates,Aluminum Trichlkride Anhydrors Power,Colorless Transparent Liquid
Quzhou CanWin New Material Co., Ltd. , http://www.canwinnm.com