Door catcher, also known as door stopper, is a kind of device that holds the positioning after the door leaf is opened to prevent the wind from blowing or touching the door leaf and closing it.
There are two kinds of wall-sucking suction and suction, which can be selected according to the situation at home, but it should be noted that sometimes wall-sucking can only be installed on the baseboard, so that long-term use can easily kick down the baseboard. This situation is best to suck. The best door stopper is also made of stainless steel, and the poor quality of the door stopper is most likely to break at the place marked by the green arrow on the map, so you can squat at this position when you buy it. If it will be deformed, do not buy it.
Door suction shopping method:
1, brand
If you go to the building materials market, you will find that there are really too many brands of door stoppers. In fact, the prices of mainstream products are mostly in the tens of dollars. If you buy products from the brand door, we can pay more attention to domestic, high-quality brand-name products, most can get a higher cost performance.
2, material
Most of the high quality door stoppers are made of stainless steel. The door stopper of this material has the characteristics of sturdiness and durability and is not easily deformed. When purchasing door-sucking products, we must pay special attention to the appearance of the door stopper, the manufacturing process, and the toughness of the shock-absorbing spring. We should try to buy products that are sculpted with sturdy shapes, fine craftsmanship, and high shock-absorbing toughness.
3ã€Applicability
When buying the door stopper, pay attention to the suitability of the door stopper. Here's an example to illustrate the problem: If the door stopper of your house is installed on the wall, you should pay attention to whether there is any item with a certain thickness, such as heating, lockers, etc. above the door stopper. If there is any, you need to change the location and install the door stopper. Or install a relatively long door stopper product, otherwise, it is very likely that it will not work even if the door stopper is installed.
Grinding Glass Beads, Resistance thermolastic Glass Beads for Grinding Glass Beads for Grinding,Road Marking,Blasting, Glass Beads ,with the advantages of smooth surface, even size, high hardness, wearable and stable, widely used as disperser, grinding media and filler materials in day, paint, ink and chemical industry etc.
Grinding and Polishing Glass Beads :
Size:0.8-1mm;1.0-1.5mm;1.5-2mm;2.0-2.5mm; 2-3mm;2.5-3mm; 3-4mm; 4-5mm; 5-6mm etc.
The ability to operate a mill with smaller-diameter grinding media greatly increases the mill's efficiency and can overall further increase the quality of product through finer grinding. However, smaller Glass beads are more prone to hydraulic packing due to their decrease in mass per bead. Hydraulic packing occurs when the drag flow from the product pulls the media with the product and ultimately causes media packing around the discharge screen.
Glass beads have replaced the conventional grinding media : Ottawa sand, Steel balls, Pebbles, Ceramic balls etc. in Sand mills, Ball mills, Attrition mills for the following simple reasons :
They do not react or get reacted with the materials that are ground.
Being spheres, every bead in charge takes important part in the grinding operation.
They have smooth glassy surfaces and hence slide without much friction there by reducing the load on the stirring mechanism.
Glass beads are of interest to the following industries:
a) Paints. b) Pigments. c) Ink & Printing Inks. d) Dyes. e) Chemicals. f) Cosmetics.
g) Gums & Waxes.
Grinding Glass Beads
Polishing Blasting Grinding Glass Beads , Milling and Grinding Glass Beads Grits, Abrasive Jetting Grinding Glass Beads, Grinding Media Spheres Grinding Glass Beads
YONGQING BAILUYUAN GLASS PRODUCTS CO.,LTD , https://www.blyglassbeads.com