Ball valve is mainly used in the pipeline to cut off, distribute and change the flow direction of the medium. Ball valve is widely used in recent years, a new type of valve, which has the following advantages: 1. Fluid resistance is small, the resistance coefficient and the same length of the pipe section. 2. Easy to operate, quick opening and closing, as long as 90 ° rotation from full open to full close, easy to remote control. 3. Easy maintenance, ball valve structure is simple, the seals are generally active, demolition and replacement are more convenient. 4. Simple structure, small size, light weight. 5. Tight and reliable, the current ball valve sealing surface material widely used plastic, good sealing, vacuum system has also been widely used. 6. In the fully open or fully closed, the ball and valve seat sealing surface and media isolation, the media will not cause erosion of the valve sealing surface. Ball valve has been widely used in petroleum, chemical, power generation, papermaking, atomic energy, aviation, rockets and Other departments, as well as people's daily lives. Ball valve structure can be divided according to the structure: First, forged steel ball valve fixed ball is fixed, does not produce pressure after the move. Fixed ball valve with a floating valve seat, subject to media pressure, the valve seat to move so that the ring is pressed on the ball in order to ensure the seal. Usually with the ball on the lower shaft equipped with bearings, operating torque is small, suitable for high pressure and large diameter of the valve. In order to reduce the operating torque of the ball valve and increase the reliability of the seal, in recent years there have been oil seal ball valves, both in the sealing surface injection of special lubricants to form a layer of oil film, which enhanced the tightness and reduced operating torque , More suitable for high pressure large diameter ball valve. Second, flexible ball valve Ball valve ball is flexible. Sphere and seat ring are made of metal materials, sealing a large pressure, relying on the pressure of the media itself has reached the seal requirements, must impose external forces. This valve is suitable for high temperature and pressure medium. Elastic ball is in the lower end of the ball wall to open a flexible groove, and to obtain flexibility. When closing the channel, the wedge-shaped head of the valve stem causes the ball to expand and press against the valve seat to seal. Before turning the sphere, the wedged head is released and the sphere then restores its original shape. This results in a small gap between the sphere and the seat, which can reduce the friction and operating torque of the sealing surface. Ball valve can be divided according to their channel position through-type, three-way and right angle. Three-way four sealed ball valve for the distribution of media and change the flow of media. Third, the hard seal floating ball valve ball is floating ball, under medium pressure, the ball can produce a certain displacement and squeeze the sealing surface at the outlet end to ensure that the outlet seal. Floating ball valve structure is simple, good sealing, but the ball to withstand the load of the working medium all to the export seal, so to consider whether the seal material can withstand the working load of the ball medium. This structure is widely used in low pressure ball valve. Ball valve is widely used in irrigation systems, mainly used in the branch pipe imports. Ball valve structure is simple, small size, resistance to water flow is also small, the disadvantage is that open or close too fast, will produce water hammer in the pipe (water pipe pressure suddenly changes in the pressure will rise). Therefore, the main pipe should not be used on the ball valve can be used in the dry, branch or on the end for flushing purposes, flushing sewage effect. Ball valve with O-ball valve and V-ball valve points. O-type ball valve with floating structure, the core is precision castings, the appearance of hard chrome plated, seat made of reinforced PTFE material, the flow channel mouth and the same pipe diameter, flow capacity is extremely large, flow resistance is very small, when closed Leakage, the general use of the switch valve, especially for high viscosity, fiber, granular media; V-type ball valve with a fixed structure, the core opened with a V-shaped incision, proportional control can be achieved, the flow characteristics of similar percentage. According to different process equipment, can be composed of high-pressure female thread ball valve and forged steel three-piece hard seal ball valve, which high-pressure female thread ball valve to be adjusted to match the valve positioner, forged steel three-piece hard seal ball valve to achieve proportional adjustment Must choose electronic electric actuator or servo amplifier. Threaded ball valve ball valve is a ball with a circular channel for opening and closing pieces of the ball with the valve stem to open and close the valve action. Threaded ball valve Butt ball valve opening and closing pieces is a porous ball around the axis perpendicular to the axis of rotation, so as to achieve the purpose of opening and closing channels. Ball valve is mainly used to open and close the pipeline and equipment media purposes.
Steel fence with decorative finials
Baochuan Wire Mesh Products Co., Ltd. , http://www.anp-wiremesh.com