[China Aluminum Network] Aluminum is our company's main operating commodity, the quality of goods and quality of service, by the vast new and old customers alike. Here we share the aluminum production process and precautions.
Aluminum production process through these processes: dosing - cutting - planing - cutting angle - bending - panel - reinforced - retest.
Ingredients: According to the order received by the factory, the data model, specifications, color choice, and then shipped to the cut before the boot to be cut.
Cut: When cutting, first adjust the positioner to the required scale. After cutting a small point first, check whether the scale is consistent with the demand, and when it matches, cut it out. Otherwise, adjust it until it stops. When cutting, the direction should be accurate. From left to right, from top to bottom, ban on anti-cut; check at the end of the cut to see if it is in line with the specification, after the plate will be lightly put in the clean channel to prevent the plate decoration The surface is damaged.
Planing: Care must be taken when planning a plan to re-analyze, confirm, and shape it.
Cut angle: Punching on the angle machine, cut angle does not allow beyond the centerline of the router.
Bend: Be careful not to repeat the bending, bending more twice to prevent fatigue damage.
Group board, reinforcement: First, prepare the information and things of the board, it should be noted that the board process can not damage the board finish.
Re-inspection: Conduct re-inspection on the finished aluminum sheet to see if it meets the manufacturing specifications and prevent the manufacturer from having a bad effect when leaving the factory.
The above is the aluminum production process and precautions, and we look forward to assisting you. If there is a need for customers to wait for your inquiries, we will sincerely serve you!
HCFCs (hydrochlorofluorocarbons) are the second generation of fluorine based gases, the original replacements for CFCs.
These products, which include R22, R123, R401A, R401B, R402A, R402B, R408A, and R409A, are categorized as having medium ODP (Ozone Depletion Potential) and medium to high GWP (Global Warming Potential). Consequently, they offer a slightly more environmentally friendly alternative to CFCs. They also often provide a quick and simple "retrofit" of existing CFC equipment.
As HCFCs contribute both to ozone depletion and global warming, the use of HCFCs is being phased out as part of global legislation, such as the Montreal Protocol. Some countries and regions are operating an accelerated phase out.
Zhejiang Zhonglan Refrigerants Co.,Ltd sell a wide range of HCFC products like R22, R141b,R142b in many locations and in a variety of packages including cylinders, drum tanks and iso-tank supplies. This includes reclaimed HCFCs in some locations. We also support the transition away from the use of ozone depleting products and can offer advice on alternative products, such as hydrofluorocarbons (HFCs) and natural refrigerants, which have a lower impact on the environment.
Our factories passed ISO9001:2008, ISO14001:2004 and TS16949:2009. With scientific enterprise development, advanced production technology, solid technical assistance, overall quality assurance, excellent sales team, UISZL brand wins better and better reputation in the domestic and overseas market, and the turnover is higher and higher. We not only provide high quality products, but also the better and better service.
A/C Hcfc Refrigerants,HCFC Refrigerant Gas,R134A Alternative,R134A Retrofitted Refrigerant Gas
ZHEJIANG ZHONGLAN REFRIGERATION TECHNOLOGY CO.,LTD , https://www.uiszl.com