Construction method of thermal insulation exterior wall paint decorative wall structure cover layer:
1. Anti-cracking mortar: Polymer anti-cracking mortar.
2. Use 300L mortar mixer to prepare according to the ratio of anti-crack mortar. The anti-cracking fiber needs to be immersed in water for 12 days in advance, and the water-cement ratio is appropriately adjusted according to the actual weather and transportation distance. The mixing time of the prepared mortar in the mixer is not less than 20-30 minutes to ensure uniform mixing.
3. One day before the anti-cracking mortar, rinse the surface of the insulated brick wall that has been pasted with clean water, wash away the surface separation layer, avoid the phenomenon of delamination and hollowing of the plaster layer and the insulation layer, and enhance the stickiness. Knot strength.
4. Apply a uniform anti-cracking mortar on the surface of the insulation layer. The area is slightly larger than the mesh cloth. The thickness of the mortar is about 2-3mm. Then apply 4×4 alkali-resistant glass fiber mesh cloth and apply it with a trowel. Press the mesh cloth into the mortar, and the mesh cloth should overlap each other by 50-60mm; the door, window, hole, and foot should be free from 50-60mm, and the mesh of the yin and yang should be taken. Connect 200mm. The mesh cloth should be smooth, no wrinkles, delamination and leakage, and the mortar fullness is 100%.
5. After the initial cracking of the first crack-resistant mortar (about 4-6 hours), if the surface is too dry, it can be sprinkled with water, and then wipe the surface with 2-3mm thick anti-cracking mortar. Because the surface layer after the pulverization lacks aggregate, cracks are easy to occur. After the second layer of plastering and solidification, the surface layer should be watered and cured once every 3-4 hours, keeping the surface moist for more than 3 days.
6. The surface layer of the wall below 2 meters from the ground can be properly thickened.
Innovative inkjet printing technology also brought great vitality of ceramic tiles,Thin Porcelain Tiles patterns more and more colorful. At the show, regardless of the stone, wood effect of the tiles, or geometry, large ceramic plate specifications, without exception, are up and down in the surface texture of the bump mold up and down enough, and jumped out of the past limited to stone or wood Natural attributes, into many designers and technicians ideas.Thin Digital Tiles.
The company has developed a successful application of inkjet printed tiles equipment with seepage glaze, the color infiltration into the blank 0.5 ~ 0.6mm, if the polishing depth of 0.15mm, leaving the pattern is still clear to see the booth gray black and white seepage stone imitation The effect of the 1000x3000mm polishing plate, no less than cast glaze effect, if combined with fine powder, particle cloth technology, the effect will be better! This may be the future direction of development of polished tiles and polished sheets.
Inkjet technology combined with spray glaze process, the decorative ceramic sheet to further enhance, still based on large-size products, product thickness between 3-6mm. A variety of wood, stone-like inkjet, polishing, semi-polishing, full cast glaze, matt ceramic sheet products. In the product design, the ceramic sheet is not weaker than the traditional ceramic tile.
At present, the marketing of sheet metal is still dominated by engineering channels. Real estate, subways, hospitals, high-rise buildings and other public works are the key sales areas of Thin Ceramic Tiles, Practice has proved that up to 100 meters high-rise, the use of ceramic wall tiles for paving, is safe and feasible, the material costs, construction costs, transportation costs, and ceramic curtain wall hanging compared to substantially reduce the cost of more than 50%. Therefore, in terms of engineering channels, instead of the traditional curtain wall hanging system, is one of the important applications of ceramic sheet. At present, the ceramic sheet has begun to be used in large-scale applications in high-rise plug-in systems, a lot of engineering projects.
For the northern market, we also introduced the construction material system for Digital Printed Tiles plus thermal insulation materials. Compared with the traditional dry hanging products, ceramic plates not only lower the cost, but also more convenient paving, no steel skeleton, the number of workers reduced from two to one person. A building, originally with 100 tons of ceramic products on the wall, the selection of sheets, only 30 tons, construction costs have also been significantly reduced. "
Thin Digital Tiles
Thin Digital Tiles,Inkjet Tiles,Bathroom Thin Digital Tiles,Porcelain Thin Digital Tiles
UMS New Materials Industry Co.,LTD , https://www.ums-factory.com