Why do such things happen repeatedly? When can consumers really have a safe and secure shower space? Who else can stand up to protect the safety and interests of consumers?
In general, there are several reasons for the explosion of the shower room:
First, there is a problem in the process of glass tempering;
Second, there is a problem with the design of the shower room product, leaving a safety hazard;
Third, the installation technique of the installation technician is not up to standard, causing the shower room to be tilted or twisted;
Fourth, the daily use method is not standardized.
Because the explosion of the glass in the shower room is temporarily unpredictable, the control room can not only choose a big brand, but also choose a rose glass laminated glass shower room, and can also improve the safety of the shower room glass through other safety measures. Performance, the threat of human body damage caused by the explosion of the shower room is minimized.
First of all, when choosing a shower room product, try to choose a laminated glass shower room. Because the laminated glass is not easily penetrated after being damaged by impact, the pieces will not fall off, and the film is tightly bonded together, even if the shower room is self-destructed. Phenomenon can also effectively reduce the damage factor. There are many products in the shower room made of laminated glass.
Second, be sure to install it properly during installation. The shower room is a custom-made product. Unlike standard products such as toilets and faucets, the installation master can be properly installed according to the installation instructions without strict professional training. Even if the shower room is delivered to the customer's home, it is only a semi-finished product and requires professional training. The master can make the correct installation. If the installer is not professional, it will have a series of negative effects and even glass self-explosion. Therefore, after the installation of the shower room, it must be installed and accepted to ensure safety.
Again, during the use of the shower room, the water temperature should be gradually increased to effectively reduce the chance of explosion. The inside of the shower room is a closed space. When the high temperature and high pressure accumulate to a certain extent, pressure will be formed on the glass screen, resulting in uneven heating of the glass, which may cause the tempered glass to burst. Therefore, it is recommended that you do not suddenly use hot water that is too hot when you take a shower.
Finally, remind you to avoid collisions in the shower room and lightly turn off. Although the strength of tempered glass is relatively high, even when we experimented, it was no problem to put a few people on the ground. However, the characteristic of tempered glass is that it is more afraid of sharp things than ordinary glass, and the shower room is fixed, and the wall is correct. Affect the safety of tempered glass, and if it is collided again, it will easily cause an overall explosion.
AlNiCo material is comprised of aluminum,nickel,cobalt and iron with varying additions of other elements.There are two different manufacturing processes for AlNiCo:Cast and sintered.Cast AlNiCo can be made into many sizes and shapes,whereas Sintered AlNiCo is usually restricted to smaller sizes.However,both processes lead themselves to complex geometries and configurations.Standard Sintered AlNiCo has tighter dimensional tolerances due to its processing.It also has slighty lower magnetic properties,but better mechanical strength than Cast AlNiCo products.
Sintered Alnico magnet
Cast AlNiCo
Alnico Magnet,Alnico 5 Magnets,Alnico 8 Magnet,Bass Pickup Alnico Magnet
Chongqing Great Well Magnet Co.,ltd. , https://www.gwmagnet.com