Most of the new houses that have been renovated and decorated are already occupied. However, while the owners were happy to enter the new house, they found that decoration and decoration left many “sequelaeâ€. Furniture and decoration styles do not match, decorations are piled up... A series of problems plagued the owners who just stayed. In this regard, the reporter interviewed relevant designers and experts, starting from the main problems existing in home improvement, telling you how to avoid these problems in the end.
Question one: furniture and decoration "fight"
Miss Wang chose a beautiful set of furniture for her new home. After the furniture was delivered to her home, Ms. Wang's family was blinding and the furniture was not only matched with the decoration style, but the size was not appropriate.
Ms. Wang said that the bedroom is warmer in shades, and the wardrobe that is bought is too cold; for the study, because the line and switch positions are all in place, when a new writing desk is put in, it cannot make it on the table. The lamp is connected directly to the power supply.
Diagnosis: Hua Guo Huizhou designer Guo Gong stated that Miss Wang’s illness lies in “first buying furniture after renovationâ€. "In the renovation, no consideration was given to placing furniture. This is a very taboo in the decoration industry."
Prescription: According to the furniture decoration style
Guo Gong revealed to reporters that at present, there is a commonly used "furniture claim" in the decoration industry, and the core content is to determine the style of home decoration and layout through furniture. "To decorate the style of furniture is usually more in place, and to decorate the style of furniture to decorate the style, usually when the furniture is selected, and more tired, but also often produce some regrets."
Question two: The wall is covered with ornaments
In order to make the home look more beautiful, many owners do not miss any corners and dress up every place in the home, not even the wall.
The reader, Mr. Zhao, said that the decoration of the home has been very complete, and you can look at the wall full of hanging ornaments, "the old feeling is not that taste!" Mr. Zhao does not understand, which in the end what is wrong?
Diagnosis: According to industry insiders, the wall is the most important place for home decoration, but the owner often does not know enough about it, and it is easy to go to two extremes: one is to pile up decorations and the other is to leave the entire wall “whiteâ€. The extremism Mr. Zhao took was a crime that piled too many decorations on the wall.
Prescription: Choose wall decorations according to the ground style
Guo Gong said that on the wall decoration, avoid hanging too many decorations. In the decoration of the living room, neither can do nothing nor do it in large quantities. Wall decoration is not practical. Long hair decoration designer Yin Yong believes that the wall decoration should be coordinated with the ground decoration. Yin Yong said that the style of the floor decoration should be used to determine the wall decoration.
Intimate reminder decoration decoration should be separated from the primary and secondary
For many families, in order to fully decorate their homes, each space is often valued, and each place wants to form a visual center. In fact, the result of doing so can only make the visual center of home improvement missing. In this regard, some people in the industry believe that the owners can work hard from the following points:
1. There is preferably only one visual center in each independent space.
2. Have main colors. Taking the living room as an example, the floor often determines the main colors of decoration and decoration, and the sofa also occupies an important position.
3. There are also major differences between soft furnishings. The main color of soft furnishings should be the same as the main color of home improvement.
4. More efforts should be made to embellishment. Appropriate use of embellishments can provide the finishing touch
Bay window decoration entrance decoration decoration furniture style decoration home decoration decoration design decoration living room decoration style sofa study furniture small study room layout bedroom wardrobe home accessories home decoration home bedroom bedroom home decoration home bedroom lamp
Thin wall injection molding is a specialized form of conventional injection molding that focuses on mass-producing Plastic Parts that are thin and light so that material cost savings can be made and cycle times can be as short as possible. Shorter cycle times means higher productivity and lower costs per part.
The definition of thin wall is really about the size of the part compared to its wall thickness. For any particular plastic part, as the wall thickness reduces the harder it is to manufacture using the injection molding process. The size of a part puts a limit on how thin the wall thickness can be. For packaging containers thin wall means wall thicknesses that are less than 0.025 inch (0.62mm) with a flow length to wall thickness greater than 200.
The following industries make use of thin wall molding:
food packaging ( e.g. food containers and lids)
automotive (e.g. both structural and non-structural car parts)
mobile telecommunications (e.g. mobile phone housings)
medical (e.g. syringes)
computing equipment (e.g. computer housings)
Thinwall Injection Mold,Thinwall Mould Maker,Oem Injection Plastic,Plastic Parts
PF Mold Co., Ltd. , http://www.pf-mold.com