PANDAWIRE for stone cutting: Diamond Multi Wire is a newest diamond wire materials used by granite multi wire saw machine to saw granite slabs to replace traditional granite gang saw.
Diamond Multi Wire is suitable for all kinds of granite slab cutting with following specialties:
High cutting efficiency, 10-15 times than granite gang saw machine,Â
Smooth cutting surface, get the even and smooth slab,
Always involve low power consume and less raw material waste,
Low noise and friendly surroundings,
Easy manipulation and with high yield, low cost, safety and environmental protection etc.
Â
Technical Features:
Suitable for multi wire saw with 5 to 60 wires as a group.
Injecting endless diamond wire is applied to lower wire broken off.
Strong cable with very little distortion effectively reduces mutual interference between the closed loop wire when cutting.
Wire pre-sharpened by machine to ensure easy starting on all kind of granite.
Used to the end of its life without the need for re-coating on it.
Perfect to match with SIMEC, Universo, Gaspari, Pellegrini and Bidese(Breton) multi wire saw machines.
Item NO. | Bead Diameter (mm) | Beads/Meter | Application | Coating |
PA18 | φ7.2 | 37 | Granite Slabs | High Strength Plastic |
PA20 | φ6.2 | 37 | High Strength Plastic |
Parameters:
Application | Wire Speed(m/s) | Cutting Speed(m2/h) | Life(m2/h) |
Soft Granite | 28-32 | 0.7-1.3 (Pcs No.) | 6-13 |
Medium Hard Granite | 28-32 | 0.5-1.0 (Pcs No.) | 4-8 |
Hard Granite | 25-30 | Â (Pcs No.) | 2-6 |
Bead Specification:
Bead Diameter(mm) | Working Layer Height(mm) | Support length(mm) | Bead Type |
φ7.2 | H6.5,H7.0 | 10.5 | Sintered |
φ6.2 | H6.5,H7.0 | 10 | Sintered |
Other specifications are available according to customer's requirements.
PANDAWIRE Diamond Multi Wire: Modern gang saw can produce 3000 to 4000 square meters of 2 cm thickness slabs, PANDAWIRE Diamond Multi Wire can produce 5000 to 6000 square meters of slabs cut at any thickness between 1 to 5 cm.
PANDAWIRE Diamond Multi Wire most common specs:
1. φ7.3mm Beads, 24.5 LM Diamond Wire, 36 Beads per LM for Granite Multi Wire Saw Machine;
2. φ7.5mm Beads, 17.5 LM Diamond Wire, 37 Beads per LM for SIMEC Granite Multi Wire Saw Machine.
FAQ:
Q1: Can I have a sample for testing?
A:Samples are still to be paid but discounted price can be provided.Â
Q2: Do you have the inspection procedures?
A:100% strict inspection and testing for every order before packing.
Q3: How can i get the after sale services?
A:Free replacement will provide once the problems casued by our product quality.
Q4: Can I have a visit to your factory before the order?
Â
A: Sure, welcome, here is our address: Yantai, Shandong.
Â
CONTACT:
Â
GCN40
Gas-actuated fastening tool for interior finishing applications
Features/Benefits
- Gas Technology – Fuel Injection
- No License Required
- Easy push down force
- Battery "OFF" position
- Magazine Capacity: 30-Pin Magazine
-
DC 7.4v Li-ion battery platform shared with other NANSHAN gas actuated tools
- Fastener length range: 40mm maximum
- Drives 1000 fasteners with a single gas can
The GCN40 Gas Actuated Tool has more power than the competition.
More power equals better performance in steel to steel and hard aggregate concrete applications.
Applications
- Widely used in the installation of aluminum alloy and plastic steel windows and doors
- Interior decoration and cable fixings
- Available for the frequent and repeated fastening jobsite, and top or ceiling installation
Gas Actuated Tool,Gas Nailer Gun,Ramset Gas Nailer,Gas Fastening Nail Gun
Sichuan Nanshan Powder Actuated Fastening System Co., Ltd. , https://www.nanshanpat.com