After many buyers purchase the rally machine, the operation of the manufacturer's rally machine is relatively unfamiliar, and the basic knowledge of the normal maintenance of the rally machine is lacking.
Author: Xiamen Haida Precision Instrument Co., Ltd.
Published date: 2013.11.29
After many buyers purchase the rally machine, the operation of the manufacturer's rally machine is relatively unfamiliar, and the basic knowledge of the normal maintenance of the rally machine is lacking.
The following is explained in detail by Xiamen Haida Precision Instrument Co., Ltd. How to calibrate the tension machine:
The basic function of the tension machine is the tensile test. The tensile test is one of the most widely used methods for studying the mechanical strength of materials. It needs to use constant speed motion. According to the different methods of load measurement, the early stage can be roughly divided into pendulum type tensile testing machine. And tensile testing machine two types.
The tensile machine is also called the tensile testing machine. It is mainly composed of load cell, transmitter, microprocessor, load drive mechanism, computer and color inkjet printer. It is mainly used for various physical and mechanical performance tests of rubber, profiled materials, pipes, plastic films, plastic sheets, wires and cables. The tension machine fixture is an important part of the instrument. Different materials require different fixtures, which is also an important factor in whether the test can be carried out smoothly and the accuracy of the test results is high or low.
First of all, let's talk about the strength value correction of the tension machine: After entering the computer program, open the calibration interface, press the test to start, take a standard weight weight and hang it on the upper clamp connector, record the computer display power value, and calculate the standard weight. The difference between the weights should not exceed ±1%.
Followed by the speed correction of the tension machine: 1. First record the initial position of the crossarm of the machine, and select the speed value on the control panel (note the horizontal straight stroke using the standard straight steel ruler). 2. At the same time as starting the machine, the electronic stopwatch starts to count for one minute. When the stopwatch arrives at the time, press the stop button of the machine. According to the time of the stopwatch, record the cross-travel stroke value as the rate per minute (mm/min). The difference between the stroke value and the straight steel rule, and calculate the cross-arm stroke error value, should not exceed ±1%.
If you need to know more manufacturers, repairs, quotations and parameters of the tension machine, please visit our website Xiamen Haida Precision Instrument Co., Ltd. We are honored to serve you.
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Excavator Radiator is an important part of the engine. Excavator Radiator is mainly composed of Radiator Core, water pipe, radiating air blade, water tank and sewer. The upper water tank is connected with the water tank under the radiator by a water pipe, and the hot water becomes warm water when it flows from the top to the bottom of the radiator. The cooling air blades form an orifice through which a large amount of cold air passes through the air duct through which the fan sucks and the relative wind speed of the vehicle travels forward. The heat of cooling water absorbs and dissipate in the atmosphere.
Radiator Core
Radiator Core,Aluminum Radiator Core,Radiator Core Replacement,Radiator Cores For Sale
Jining Tongderui Construction Machinery Co., Ltd. , https://www.tdr-excavatorparts.com